Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Roof issue

Discuss problems you have had or are having with your Z4
Post Reply
GAN1
Newbie
Newbie
Posts: 4
Joined: Mon Dec 12, 2016 3:08 pm

Roof issue

Post by GAN1 » Fri May 19, 2017 10:36 pm

Hi all
I'm just in the process of relocating my roof motor. I've hit a problem where I cant get the short hydraulic pipe to allow me to get the motor into the boot because it's the wrong side of a bar, the opposite end to the pump and motor. Can anyone suggest how I manage to get the pipe the other side to give me enough length to get the motor in the boot.
Thanks Guy

Dietcokeman

Roof issue

Post by Dietcokeman » Sat May 20, 2017 6:38 pm

May sound silly but unbolt the pipe from the pump and re route it as required then bolt it back on . Top up the fluid. The pump is self bleeding so it should be fine .

GAN1
Newbie
Newbie
Posts: 4
Joined: Mon Dec 12, 2016 3:08 pm

Roof issue

Post by GAN1 » Sat May 20, 2017 9:04 pm

Yeah was gonna do that but I was told they usually leak once they've been undone and I don't have any spare seals. Probably end up giving it a go though. Cheers.

Dietcokeman

Roof issue

Post by Dietcokeman » Sun May 21, 2017 8:49 am

Unlikely to be honest, just make sure you get all the cooper washers back on and you should be fine . :thumbsup:

Post Reply