Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
The final piece
- thanatu55
- Senior Member
- Posts: 1452
- Joined: Mon Jul 25, 2016 4:50 pm
The final piece
Big thanks to Mike (DLV) for dropping this off today, very much appreciated
- Ducklakeview
- Lifer
- Posts: 6362
- Joined: Tue Mar 22, 2016 4:08 pm
- Location: Merseyside
The final piece
Mike
- Marlon
- Lifer
- Posts: 10899
- Joined: Mon Jan 05, 2015 11:13 am
- Location: Lancs.
- Contact:
- JINGLE
- Senior Member
- Posts: 2550
- Joined: Wed Apr 23, 2014 9:20 pm
- Location: Norwich, Norfolk
The final piece
Is it not fitted yet?! is
- thanatu55
- Senior Member
- Posts: 1452
- Joined: Mon Jul 25, 2016 4:50 pm
The final piece
My car is too low to get on the ramp lol. Need to get my dad's skates on it, and cut into the bumper/diffuser. Soon hopefully!
-
- Member
- Posts: 978
- Joined: Mon Apr 14, 2014 10:28 am
The final piece
Looks good! Did Mike make this?
-
- Member
- Posts: 277
- Joined: Thu Jun 05, 2014 5:40 pm
The final piece
Do you have to move the battery into the boot (like an //M) to fit that?
- thanatu55
- Senior Member
- Posts: 1452
- Joined: Mon Jul 25, 2016 4:50 pm
The final piece
It's removed from a previous 2.0 so should just be a simple bolt on, no need to move the battery. Mike has provided all the fittings needed. This wasn't really in the plans until sometime next year but Mike was so kind as to give a heads up when he got hold of it.
- buzyg
- Legend
- Posts: 26528
- Joined: Fri May 20, 2011 6:11 pm
- Location: Cornwall
- thanatu55
- Senior Member
- Posts: 1452
- Joined: Mon Jul 25, 2016 4:50 pm
The final piece
Good timing too since my exhaust trim fell off and got flattened yesterday on the road
- Ducklakeview
- Lifer
- Posts: 6362
- Joined: Tue Mar 22, 2016 4:08 pm
- Location: Merseyside
- Ducklakeview
- Lifer
- Posts: 6362
- Joined: Tue Mar 22, 2016 4:08 pm
- Location: Merseyside
The final piece
This fits without altering the battery tray, all that needs moving is the charcoal cannister, which needs the holes redrilling in the plastic tabs and moving about 20mm to the O/S. The right hand silences has mounts that fit to the charcoal cannister mounting studs, so it's a straight fitting job, other than the bumper cut.
Mike
- thanatu55
- Senior Member
- Posts: 1452
- Joined: Mon Jul 25, 2016 4:50 pm
The final piece
Thanks for clarifying Mike, gives me something to refer to when I get it up in the air
- Ducklakeview
- Lifer
- Posts: 6362
- Joined: Tue Mar 22, 2016 4:08 pm
- Location: Merseyside
The final piece
I was tempted to keep it myself and cut off the tips for my own quad, but common sense prevailed...
Would have been a shame to ruin a beautifully made system..
Mike
Would have been a shame to ruin a beautifully made system..
Mike