My Angel Eyes Journey

ben g · Post by **ben g** » Wed Mar 12, 2014 1:43 pm

perseverence johnny!

Have you asked how lukes have been? I'll try and get a pic of mine to show you just how much silicone they need on (lots).

Terryvision · Post by **Terryvision** » Fri Mar 14, 2014 7:23 pm

Just started my light headlight journey too (no AE as not a fan)

Took about an hour to cut one open and replace the clear stick and re-glue

Just waiting for the PU adhesive to dry (ie cable ties)

DanStarr · Post by **DanStarr** » Tue May 13, 2014 9:51 pm

Did you get your lights sorted in the end Jonny?

DanStarr · Post by **DanStarr** » Tue May 13, 2014 10:04 pm

Good to hear fingers crossed for you they stay dry! I hate misting lights annoying the hell out of me lol

ranski · Post by **ranski** » Tue May 13, 2014 10:05 pm

The acid test is a pressure hose on the fitted lights

Sent from my iPhone using Tapatalk

R3AP4R · Post by **R3AP4R** » Wed May 14, 2014 2:15 pm

Hi

Just ordered these myself, I emailed my concerns RE misting and she advised that they have had 0.001% of units returned for misting and on those occasions new units have been sent out!. Woops just ordered black version!

*jimmyj* · Post by ***jimmyj*** » Thu May 15, 2014 12:36 am

Black inners on sterling grey? Will this look good? Thinking about it

R3AP4R · Post by **R3AP4R** » Fri May 16, 2014 8:19 am

*jimmyj* wrote:Black inners on sterling grey? Will this look good? Thinking about it

I think it would look great!

Zikim · Post by **Zikim** » Sun May 03, 2015 12:31 pm

DanStarr wrote:Pretty much you just uplug the olds ones and they plug into the looms on the new headlights. Had to wire up the Angel eyes tho decided to connect them to the side lights. It has a third light along the top like a strip but ive unscrewed that but had to leave the bulb in and taped over the hole. I'm lucky my Dad did most of it

Looking at buying these this weekend after you responses last weekend to my thread. Just two quick questions - the third light along the top, can you give a insight to what this is as it is not shown in the ebay advert. Also from connecting in to the side lights, have there been any problems with warning lights and how does it look with the Halos on with side lights?

tomoz4white · Post by **tomoz4white** » Tue Sep 20, 2016 6:46 pm

DanStarr wrote:Pretty much you just uplug the olds ones and they plug into the looms on the new headlights. Had to wire up the Angel eyes tho decided to connect them to the side lights. It has a third light along the top like a strip but ive unscrewed that but had to leave the bulb in and taped over the hole. I'm lucky my Dad did most of it

Taped over the hole ?

Number5 · Post by **Number5** » Tue Sep 20, 2016 8:53 pm

tomoz4white wrote:
DanStarr wrote:.... and taped over the hole.
Taped over the hole ?

Danstarr is an electrician by trade ...They always have a roll of insulation tape to hand. One tool fixes all !

DanStarr · Post by **DanStarr** » Tue Sep 20, 2016 8:55 pm

Number5 wrote:
tomoz4white wrote:
DanStarr wrote:.... and taped over the hole.
Taped over the hole ?
Danstarr is an electrician by trade ...They always have a roll of insulation tape to hand. One tool fixes all !

the only tool I need!

tomoz4white · Post by **tomoz4white** » Wed Sep 21, 2016 8:54 am

DLegendD wrote:Have got the black ones from 2excite too. No misting on mine but guess if you did get some could reseal them with some silicone? Just one point to whoever buys them they have inbuilt motors/steppers so if they stop working you'll have to find a way to replace/fix them or buy a whole new headlight. Otherwise all plug and play and look great...

What is the yellow ish line at the top of the light fella ?

DanStarr · Post by **DanStarr** » Wed Sep 21, 2016 1:07 pm

tomoz4white wrote:
DLegendD wrote:Have got the black ones from 2excite too. No misting on mine but guess if you did get some could reseal them with some silicone? Just one point to whoever buys them they have inbuilt motors/steppers so if they stop working you'll have to find a way to replace/fix them or buy a whole new headlight. Otherwise all plug and play and look great...

What is the yellow ish line at the top of the light fella ?

That's the side light bulbq

streetcar · Post by **streetcar** » Wed Sep 21, 2016 1:35 pm

Hi Dan
Please define a little bit of wiring?
Also, I I have read lots of posts about fitting these type of lights some of which went into very painful detail but the main theme was they don't work fully without fitting all sorts of electrical components, what say thee?
Regards

Z4-forum.com

Z4-forum.com