I felt mine booming through the leather seat on the drive home today. Yours plugged in?Scaramanga wrote:My carver subs don't seem to make any noise. Installed the kenwoods into my E46 which sound amazing for the money.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Carver/DSP Delete - easier than expected
-
- Senior Member
- Posts: 1084
- Joined: Tue Apr 12, 2016 7:42 pm
Carver/DSP Delete - easier than expected
-
- Newbie
- Posts: 2
- Joined: Sun May 29, 2016 1:03 pm
Carver/DSP Delete - easier than expected
Hey all,
Brand new 2004 Z4 3.0.i owner and I want to say thanks for all of the awesome information in this thread! One of my first orders of business will be to rip out the head unit for an Alpine UTE-62BT. Need to figure out which amp to supplement it with, then hand it over to an audio shop for install. This is a fantastic resource thread, so thanks!
Brand new 2004 Z4 3.0.i owner and I want to say thanks for all of the awesome information in this thread! One of my first orders of business will be to rip out the head unit for an Alpine UTE-62BT. Need to figure out which amp to supplement it with, then hand it over to an audio shop for install. This is a fantastic resource thread, so thanks!
-
- Senior Member
- Posts: 1084
- Joined: Tue Apr 12, 2016 7:42 pm
Carver/DSP Delete - easier than expected
I'll post pics one my steerings fixed. I had new audio system put in in the friday. steering fail on the monday. been in the garage for a week now waiting on the part.Bek wrote:Hey all,
Brand new 2004 Z4 3.0.i owner and I want to say thanks for all of the awesome information in this thread! One of my first orders of business will be to rip out the head unit for an Alpine UTE-62BT. Need to figure out which amp to supplement it with, then hand it over to an audio shop for install. This is a fantastic resource thread, so thanks!
-
- Member
- Posts: 875
- Joined: Thu Dec 10, 2015 1:21 pm
Carver/DSP Delete - easier than expected
is there any reason this specific amp has been used? can any other amp be used?
-
- Newbie
- Posts: 13
- Joined: Mon Nov 13, 2017 7:30 pm
Carver/DSP Delete - easier than expected
Hi I not the speaker wire diagram on page 3 massive thankyou will be a big help, so it looks like I can identify what wires go to what in the car at the amplifier plug, but what about the 8 speaker wires from the stereo to the plug?
-
- Newbie
- Posts: 13
- Joined: Mon Nov 13, 2017 7:30 pm
Carver/DSP Delete - easier than expected
Please chaps
-
- Newbie
- Posts: 13
- Joined: Mon Nov 13, 2017 7:30 pm
Carver/DSP Delete - easier than expected
Hi could anyone pls advise
-
- Newbie
- Posts: 13
- Joined: Mon Nov 13, 2017 7:30 pm
- Jakg
- Member
- Posts: 367
- Joined: Thu Mar 29, 2018 12:36 am
- Location: Suffolk
Carver/DSP Delete - easier than expected
Could anyone confirm:
What speakers do not have crossovers built in (i.e. a separate crossover is required when replacing the amp).
From this thread I think - tweeters and fronts (is that mid in door, or mid in footwell?)
Also, what the impedances for each speaker is - or at least if any wiring changes were required to make this better for the amplifier. I.E. the in-seat subs were wired in series to drop the impedance - anything else?
What speakers do not have crossovers built in (i.e. a separate crossover is required when replacing the amp).
From this thread I think - tweeters and fronts (is that mid in door, or mid in footwell?)
Also, what the impedances for each speaker is - or at least if any wiring changes were required to make this better for the amplifier. I.E. the in-seat subs were wired in series to drop the impedance - anything else?
- GuidoK
- Lifer
- Posts: 3171
- Joined: Tue Aug 17, 2010 1:37 am
- Location: all over the place
Carver/DSP Delete - easier than expected
?!?
Z4 3.0i | ESS TS2+ | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | fully polybushed | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers | Sachs Race Engineering clutch
- Jakg
- Member
- Posts: 367
- Joined: Thu Mar 29, 2018 12:36 am
- Location: Suffolk
Carver/DSP Delete - easier than expected
My bad, meant parallel.