JE needs OCD help :)

ba3bas · Post by **ba3bas** » Wed Jan 28, 2015 10:31 pm

Lever it up mate from the surround.

Or take the door card off

mac27040 · Post by **mac27040** » Wed Jan 28, 2015 11:29 pm

http://translate.googleusercontent.com/ ... VXZT990MFA

Aeroadster · Post by **Aeroadster** » Wed Jan 28, 2015 11:52 pm

Jonny essex wrote:
mac27040 wrote:http://translate.googleusercontent.com/ ... VXZT990MFA
Cheers mac, so basically level up and unplug?

Yep, just did this last week.

Get something with a thin edge ( flat-head screwdriver ) and lever it up and it should come out.

ba3bas · Post by **ba3bas** » Thu Jan 29, 2015 1:28 am

Be gentle

Try a trim removal tool.

You can get a multipack off amazon for cheap

ben g · Post by **ben g** » Thu Jan 29, 2015 2:04 am

Yeah don't use a screwdriver, at least not without a cloth around it.

They do come out pretty easily so a strong bit of plastic (half a credit card perhaps) should work.

I hate marks but I've learned to live with them and just enjoy the sweet sound of the straight six.

Bazoz4 · Post by **Bazoz4** » Thu Jan 29, 2015 2:55 pm

Jonny essex wrote:Im sure i have a plastic device around
My OCD doesnt allow anything but perfect

Good man JE I found plastic clothes pegs come in handy. Baz

maxman · Post by **maxman** » Thu Jan 29, 2015 3:38 pm

After you've been on that meet in South Wales their will quite a few more marks on the front end,when the rear wheels of the car you are following sprays you with chippings.Front end re spray will be on the cards

Z4-forum.com

Z4-forum.com

JE needs OCD help :)

Re: JE needs OCD help :)

Re: JE needs OCD help :)

Re: JE needs OCD help :)

Re: JE needs OCD help :)

Re: JE needs OCD help :)

Re: JE needs OCD help :)

Re: JE needs OCD help :)