Help please - wiring heated seats

[Marlon]

Update:
Fishy Dave ordered me a set of these X3 wiring looms from the states, and very kindly labelled them up for me and then posted them on.
I now have the looms (and the switch centre) and have talked to my Indy this afternoon regarding fitting. He is happy to try it out and so I've booked in for the 6 April.
Fingers crossed the retro fit loom from the X3 will fit the Z4, and I can finally make use of the heated seats.

[mr.tourette]

Update:
Fishy Dave ordered me a set of these X3 wiring looms from the states, and very kindly labelled them up for me and then posted them on.
I now have the looms (and the switch centre) and have talked to my Indy this afternoon regarding fitting. He is happy to try it out and so I've booked in for the 6 April.
Fingers crossed the retro fit loom from the X3 will fit the Z4, and I can finally make use of the heated seats.

good luck pal... hope its goes well

[Marlon]

Update:
Fishy Dave ordered me a set of these X3 wiring looms from the states, and very kindly labelled them up for me and then posted them on.
I now have the looms (and the switch centre) and have talked to my Indy this afternoon regarding fitting. He is happy to try it out and so I've booked in for the 6 April.
Fingers crossed the retro fit loom from the X3 will fit the Z4, and I can finally make use of the heated seats.

good luck pal... hope its goes well

Cheers Steve

[mr.tourette]

Update:
Fishy Dave ordered me a set of these X3 wiring looms from the states, and very kindly labelled them up for me and then posted them on.
I now have the looms (and the switch centre) and have talked to my Indy this afternoon regarding fitting. He is happy to try it out and so I've booked in for the 6 April.
Fingers crossed the retro fit loom from the X3 will fit the Z4, and I can finally make use of the heated seats.

good luck pal... hope its goes well

Cheers Steve

just in time for summer too

[Marlon]

good luck pal... hope its goes well

Cheers Steve

just in time for summer too

[Smartbear]

Update:
Fishy Dave ordered me a set of these X3 wiring looms from the states, and very kindly labelled them up for me and then posted them on.
I now have the looms (and the switch centre) and have talked to my Indy this afternoon regarding fitting. He is happy to try it out and so I've booked in for the 6 April.
Fingers crossed the retro fit loom from the X3 will fit the Z4, and I can finally make use of the heated seats.

good luck pal... hope its goes well

Cheers Steve

Hope all goes well Steve, just remember to turn them down if flames appear
Rob

[Marlon]

good luck pal... hope its goes well

Cheers Steve

Hope all goes well Steve, just remember to turn them down if flames appear
Rob

Steve is mr.tourette,
I'm Marlon (Colin)

[mr.tourette]

Cheers Steve

just in time for summer too

dont worry... will be winter again before you know it... and in all fairness its probably only 3 months a year you wont need them in this godforsaken climate of ours

[Smartbear]

Cheers Steve

Hope all goes well Steve, just remember to turn them down if flames appear
Rob

Steve is mr.tourette,
I'm Marlon (Colin)

Sorry john

[mr.tourette]

Cheers Steve

just in time for summer too

dont worry... will be winter again before you know it... and in all fairness its probably only 3 months a year you wont need them in this godforsaken climate of ours

[Marlon]

All the bits:

[Scooba_Steve]

And soon a warmth only you can feel!

When are they going in?

[Marlon]

And soon a warmth only you can feel!

When are they going in?

Booked in at my Indy on 6th April

[Smartbear]

And soon a warmth only you can feel!

When are they going in?

Booked in at my Indy on 6th April

Have you got a gaptech to remove/replace when you swap the panels over john
Rob

[Marlon]

nope, Bob