Before:
1.The acceleration of starting was weak for 3 years.
2.A subtle stutter was noticeable while reverse parking.
I put cleaning agent into every cylinder from spark plug mouth and then use air pump to clean it two week ago.
Now my e85 is back to 18 again.
It feels so good that It make me lost all interest in e89.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
18 again
- se4y
- Member
- Posts: 114
- Joined: Thu Dec 26, 2013 11:13 am
- Location: Beijing
- sw4nny
- Senior Member
- Posts: 1713
- Joined: Mon Sep 16, 2013 12:14 pm
- Location: Barnsley
18 again
Good to hear, can you give us a bit more detail ie.what cleaning agent,how the air line is used,any other info you have.
This may be basic maintenance to you but I am just a learner willing to have a crack at things.
Thanks.
This may be basic maintenance to you but I am just a learner willing to have a crack at things.
Thanks.
E85 3.oi titan silver,Maldives blue E85 3.0i gone but not forgotten
- se4y
- Member
- Posts: 114
- Joined: Thu Dec 26, 2013 11:13 am
- Location: Beijing
18 again
Step1:Hot engine after high speed driving for a period of time and then unscrew 6 spark plugs.
Step2:The cleaning agent is divided into six servings poured into six cylinder respectively from the spark plug hole in the engine.
Step3:Waiting 15 mins.
Step4:Use pump pressure booster gun to blow compressed air into cylinder room from the spark plug mounting hole covered with a cotton cloth. You'd better blow as more direction as possible. The cloth is prevent the cleaning agent come out.
Step5:Use pump pressure booster gun to blow cylinder room directly without cloth cover. Make sure there are no cleaning agent in it.
Step6:Start the car without spark plugs for 3 times. Each time last 3-4 second.(It is very importand!)
Step7:Install the spark plugs and starting the car. Idle the engine for 3 minutes and then keep 3000 RPM for 3 minutes until there is no peculiar smell come out from the exhaust pipe.
Be careful to not pour the cleaning agent on to the hot engine surface to avoid fire.
Step2:The cleaning agent is divided into six servings poured into six cylinder respectively from the spark plug hole in the engine.
Step3:Waiting 15 mins.
Step4:Use pump pressure booster gun to blow compressed air into cylinder room from the spark plug mounting hole covered with a cotton cloth. You'd better blow as more direction as possible. The cloth is prevent the cleaning agent come out.
Step5:Use pump pressure booster gun to blow cylinder room directly without cloth cover. Make sure there are no cleaning agent in it.
Step6:Start the car without spark plugs for 3 times. Each time last 3-4 second.(It is very importand!)
Step7:Install the spark plugs and starting the car. Idle the engine for 3 minutes and then keep 3000 RPM for 3 minutes until there is no peculiar smell come out from the exhaust pipe.
Be careful to not pour the cleaning agent on to the hot engine surface to avoid fire.
Last edited by se4y on Thu Jul 28, 2016 3:41 am, edited 1 time in total.