What have you done to your car today?

2dogs · Post by **2dogs** » Sat Mar 25, 2017 6:39 pm

Fitted Intarvee,
Stopped my seat from squeaking,
Cleaned out the washer bottle ( water had gone like jelly)
Then went for an hours drive

then tomorrow the big clean.

NickDE · Post by **NickDE** » Sat Mar 25, 2017 11:54 pm

: IMG_1693.JPG (64.95 KiB) Viewed 1011 times

Replaced a broken PDC sensor following Storm-Z4's instructions. Thanks !viewtopic.php?f=3&t=40568

Then cleared the error codes left by the broken one and my beepers are working again

I did think about painting it first. But when checking all four for clicking noises I noticed one of the four was already an unpainted replacement. Seeing as no one (including me) had noticed I decided the new one would go in unpainted too

NickDE · Post by **NickDE** » Sun Mar 26, 2017 8:42 pm

Cleaned and cleaned and cleaned the engine bay. Very happy with the result

: IMG_1697.JPG (78.64 KiB) Viewed 979 times

bluespit · Post by **bluespit** » Sun Mar 26, 2017 8:53 pm

Fixed the bonnet opening, broke the roof, fixed the roof

Hit the cd changer to get the stuck CD out

Changed the clock to summer time

LordOxygen · Post by **LordOxygen** » Sun Mar 26, 2017 9:19 pm

LordOxygen wrote:Oil and filter change this morning.
Used my new low profile SGS trolley jack, super piece of kit for low cars.

A couple of pics...

Edit to add, today I also changed my clock and drove about 50 miles with the roof down in the sun, the car just feels great. Really enjoying owning it, so much grip!
Got home a gave it a quick "dry" wash with Bilt Hamber QD and then backed it away into the garage ready for the next sunny weekend.

NickDE · Post by **NickDE** » Sun Mar 26, 2017 9:36 pm

bluespit wrote:Changed the clock to summer time

Oooh, me too !! Took me a while to find the manual hiding behind the seats before I could work out how to do it though

kis · Post by **kis** » Sun Mar 26, 2017 11:00 pm

NickDE wrote:
bluespit wrote:Changed the clock to summer time
Oooh, me too !! Took me a while to find the manual hiding behind the seats before I could work out how to do it though

I still need to do this!

scooobydont · Post by **scooobydont** » Mon Mar 27, 2017 8:02 am

Spot of detailing

the stripler · Post by **the stripler** » Mon Mar 27, 2017 8:44 am

Chris_D · Post by **Chris_D** » Mon Mar 27, 2017 8:46 am

2dogs wrote: Stopped my seat from squeaking.

How did u do that? noticed mine was squeaking

lordgrover · Post by **lordgrover** » Mon Mar 27, 2017 9:18 am

scooobydont wrote:Spot of detailing

Nice work.

2dogs · Post by **2dogs** » Mon Mar 27, 2017 3:48 pm

Chris_D wrote:
2dogs wrote: Stopped my seat from squeaking.
How did u do that? noticed mine was squeaking

viewtopic.php?f=3&t=56764
I didn't remove the seat ,done the bolts and used GT85 on the bits I could see

step_change · Post by **step_change** » Mon Mar 27, 2017 5:26 pm

Detailed mine.

: IMG_1695.jpg (111.46 KiB) Viewed 866 times

edinburghjon · Post by **edinburghjon** » Mon Mar 27, 2017 9:10 pm

I replaced my front rft's with ps4 and discovered my car has KW coilovers

midway · Post by **midway** » Mon Mar 27, 2017 9:18 pm

Error code P0171 so I replaced the lower intake boot as it had two splits in it. Car has 100k on it and the boot was hard and had seen better days. Cost about £28 from the main steeler and took less than an hour.

Z4-forum.com

Z4-forum.com