What have you done to your car today?

Pastry · Post by **Pastry** » Sat May 13, 2017 5:57 pm

Smartbear wrote: ↑Sat May 13, 2017 5:54 pm
Pastry wrote: ↑Sat May 13, 2017 5:31 pm I refitted the whippy

IMG_2680.JPG
What? Put the stubby back on!
Rob

Nope, I'm kind of liking the whippy on the E85.... or maybe I've had too much sun today

Rusky · Post by **Rusky** » Sat May 13, 2017 6:23 pm

Motor moved to the safety of the boot by Mike.

paddy wright · Post by **paddy wright** » Sun May 14, 2017 1:43 pm

Was never happy with the alignment I had managed to get after someone hit my car and drove off. Took it all apart again and did some fabrication and now sits pretty much perfect! Well pleased!
Before

: IMG_1253.JPG (145.59 KiB) Viewed 1154 times

After

: IMG_1256.JPG (175.57 KiB) Viewed 1154 times

: IMG_1258.JPG (193.37 KiB) Viewed 1154 times

Marlon · Post by **Marlon** » Sun May 14, 2017 5:18 pm

Neat job Paddy

paddy wright · Post by **paddy wright** » Sun May 14, 2017 5:29 pm

Marlon wrote: ↑Sun May 14, 2017 5:18 pm Neat job Paddy

Cheers Colin- been one of those nigaling jobs that been annoying me for ages!

gerryp · Post by **gerryp** » Sun May 14, 2017 8:35 pm

paddy wright wrote: ↑Sun May 14, 2017 5:29 pm
Marlon wrote: ↑Sun May 14, 2017 5:18 pm Neat job Paddy
Cheers Colin- been one of those nigaling jobs that been annoying me for ages!

I have a similar problem.
Did you remove the bumper.

MefiEcosse · Post by **MefiEcosse** » Sun May 14, 2017 8:38 pm

New alloys sealed!

paddy wright · Post by **paddy wright** » Sun May 14, 2017 9:19 pm

gerryp wrote: ↑Sun May 14, 2017 8:35 pm
paddy wright wrote: ↑Sun May 14, 2017 5:29 pm
Marlon wrote: ↑Sun May 14, 2017 5:18 pm Neat job Paddy
Cheers Colin- been one of those nigaling jobs that been annoying me for ages!
I have a similar problem.
Did you remove the bumper.

Yeah been off a few times but taken a few goes to get right as things were out of line.

bz4kev · Post by **bz4kev** » Sun May 14, 2017 9:30 pm

Striped down my 108s ready for refurb and also striped aero front bumper for plastic weld repair then prep for sale once sorted

: IMG_0027.JPG (311.77 KiB) Viewed 1085 times

: IMG_0028.JPG (295.86 KiB) Viewed 1085 times

Pabby1980 · Post by **Pabby1980** » Sun May 14, 2017 10:10 pm

Do you have to strip down the 108s for a refurb?

I'm looking at getting mine done, but for the price they can strip them down themselves...

Pastry · Post by **Pastry** » Sun May 14, 2017 10:17 pm

After fitting cruise, a new gear knob and gaiter plus refurbing the wheel the inside needed a real good clean

[IMG]http://i1253.photobucket.com/albums/hh5 ... qabmnq.jpg[/IMG]

Smartbear · Post by **Smartbear** » Sun May 14, 2017 10:30 pm

Looking good Paul

Rob

Pastry · Post by **Pastry** » Sun May 14, 2017 10:40 pm

Smartbear wrote: ↑Sun May 14, 2017 10:30 pm Looking good Paul
Rob

Cheers Mr Bear

bz4kev · Post by **bz4kev** » Mon May 15, 2017 12:49 am

Pabby1980 wrote: ↑Sun May 14, 2017 10:10 pm Do you have to strip down the 108s for a refurb?

I'm looking at getting mine done, but for the price they can strip them down themselves...

depends what your paying I am getting mates rates so helping out a bit £££££££

mac27040 · Post by **mac27040** » Mon May 15, 2017 5:45 pm

6 no. new coil packs, new NGK iridium BKR6EIX spark plugs

Z4-forum.com

Z4-forum.com