What have you done to your car today?

Steve84N · Post by **Steve84N** » Mon Oct 09, 2017 12:37 pm

jamie_z4 wrote: ↑Mon Oct 09, 2017 7:47 am Could have cleaned inside the 3.0si badge Steve

Indeed I could but I was ruined by the time I finished, a job for another day.

G600 · Post by **G600** » Mon Oct 09, 2017 12:57 pm

Replaced the ccv, luckily it didn't take anywhere near as long as the guide I found said it would

Rusky · Post by **Rusky** » Tue Oct 10, 2017 6:22 am

Just bought a set of cup holders for 80 quid.

MrPT · Post by **MrPT** » Tue Oct 10, 2017 10:38 pm

Finally changed Ye Olde Tyre Sealant.

: IMAG5010.jpg (89.6 KiB) Viewed 1077 times

Kamuela · Post by **Kamuela** » Wed Oct 11, 2017 5:24 am

Changed FCBs. 2 hours of fun. Not bad, actually; glad I have a puller, BFH wasn't going to the job. One had failed completely, one was kind of crooked on the control arm, not sure how that happens.

Buddy · Post by **Buddy** » Wed Oct 11, 2017 1:53 pm

Today I changed the Passenger door Airbag, not difficult but in unclipping the door card the panel slipped and broke the lock pin clip at the bottom of the rod, I need to find a replacement but it isn't even on the parts list and nor is the rod, would anyone have a spare? Or be able to tell me where to find one it's such a tiny bit of plastic but I'd rather not glue to the lever in the door.

ph001 · Post by **ph001** » Wed Oct 11, 2017 4:23 pm

Gave the interior a big clean up and treated it to leather conditioner...

: IMG_8726.JPG (168.54 KiB) Viewed 1032 times

edinburghjon · Post by **edinburghjon** » Wed Oct 11, 2017 4:48 pm

I added these 18" csl reps, finished in a light shadow chrome they look great. Bought from a forum member, this forum is a great resource!

markalp · Post by **markalp** » Wed Oct 11, 2017 5:15 pm

Does buying it flowers and chocolates count?

: Flowers.jpg (254.15 KiB) Viewed 1021 times

JINGLE · Post by **JINGLE** » Wed Oct 11, 2017 5:53 pm

Buddy wrote: ↑Wed Oct 11, 2017 1:53 pm Today I changed the Passenger door Airbag, not difficult but in unclipping the door card the panel slipped and broke the lock pin clip at the bottom of the rod, I need to find a replacement but it isn't even on the parts list and nor is the rod, would anyone have a spare? Or be able to tell me where to find one it's such a tiny bit of plastic but I'd rather not glue to the lever in the door.

Why did you change the airbag?

I repaired my passenger side window regulator last year and when I put it all back together the airbag light came on, won't reset or anything so I'm thinking of swapping out he air bag to see if it fixes it (if not then I assume I'll have to then look into the loom, which I don't want!!)

Rusky · Post by **Rusky** » Wed Oct 11, 2017 6:05 pm

Fitted two airvent cupholders.

Ducklakeview · Post by **Ducklakeview** » Thu Oct 12, 2017 8:25 pm

Spent 8 1/2 non stop hours cleaning her, ready for her play date on Saturday

: 20171012_194357.jpg (288.14 KiB) Viewed 957 times

: 20171012_194408.jpg (254.78 KiB) Viewed 957 times

: 20171012_194431.jpg (340.39 KiB) Viewed 957 times

: 20171012_194440.jpg (260.6 KiB) Viewed 957 times

Bloody knackered now I've arrived at work..

Happy though..

Mike

adam1985 · Post by **adam1985** » Thu Oct 12, 2017 8:35 pm

Installed a second matching light in the boot and fitted led bulbs so I can now actually see what I'm doing in there.

: IMG_20171012_203153.jpg (180.36 KiB) Viewed 955 times

benrichi · Post by **benrichi** » Fri Oct 13, 2017 8:24 pm

co-pey,

Just saw your post when you wrapped your wood grain. Was wondering what the process of getting it all out is like as I am thinking about doing something similar to my "brushed aluminium" as its looking a bit scratched and chipped in places.

bz4kev · Post by **bz4kev** » Sat Oct 14, 2017 12:24 am

Ducklakeview wrote: ↑Thu Oct 12, 2017 8:25 pm Spent 8 1/2 non stop hours cleaning her, ready for her play date on Saturday

20171012_194357.jpg20171012_194408.jpg20171012_194431.jpg20171012_194440.jpg

Bloody knackered now I've arrived at work..

Happy though..

Mike

very nice about time

Z4-forum.com

Z4-forum.com