Custom Cruise Control Loom

MrPT · Post by **MrPT** » Fri May 26, 2017 5:09 pm

Interested.

Newbers · Post by **Newbers** » Fri May 26, 2017 6:01 pm

If this would work with a coupe I'm interested.

Post by **srhutch** » Fri May 26, 2017 9:33 pm

Just the main plug causing an issue. Will try and sort one way or the other over the weekend.

Scooba_Steve · Post by **Scooba_Steve** » Fri May 26, 2017 11:13 pm

Main plug that goes into the DME? There are two different pins needed for the variants IIRC.

nick_l · Post by **nick_l** » Sat May 27, 2017 7:22 am

I'm interested also.

Killiestu · Post by **Killiestu** » Sat May 27, 2017 8:10 am

Yeah I'd be up for that, my car defo needs cruise

2dogs · Post by **2dogs** » Sat May 27, 2017 9:19 am

So I take it this will make it plug and play.
If so I'm in

DaiC · Post by **DaiC** » Mon May 29, 2017 4:28 am

I'd defo be interested, been searching for a more professional job

85genius · Post by **85genius** » Mon May 29, 2017 4:35 pm

Any update on this?

Bimmertune finally came back to me today saying it will get £20 delivered for their custom loom but would rather give my money to a forum member if this project is happening

Post by **srhutch** » Mon May 29, 2017 5:00 pm

Scooba_Steve wrote: ↑Fri May 26, 2017 11:13 pm Main plug that goes into the DME? There are two different pins needed for the variants IIRC.

No, that's just a pin, the plug for the stalk.

Post by **srhutch** » Mon May 29, 2017 5:01 pm

85genius wrote: ↑Mon May 29, 2017 4:35 pm Any update on this?

Bimmertune finally came back to me today saying it will get £20 delivered for their custom loom but would rather give my money to a forum member if this project is happening

Is that the one that just uses scotchlocks. Noticed them selling it with the stalk on eBay for £130.

Post by **srhutch** » Mon May 29, 2017 5:02 pm

I'll get a firm price by tomorrow. I'll need to buy enough parts for 4-5 to make it worth while.

Scooba_Steve · Post by **Scooba_Steve** » Mon May 29, 2017 5:40 pm

srhutch wrote: ↑Mon May 29, 2017 5:00 pm
Scooba_Steve wrote: ↑Fri May 26, 2017 11:13 pm Main plug that goes into the DME? There are two different pins needed for the variants IIRC.
No, that's just a pin, the plug for the stalk.

I'm sure they are female pins but defo two different sizes, if you're having trouble sourcing the stalk plug end let me know and I'll see if I can find it. Would be surprised if it's custom so I'm sure there would be plenty of Chinese sources but quantities can be an issue from them.

DaiC · Post by **DaiC** » Mon May 29, 2017 5:59 pm

I'd definitely have one from you if you manage to get everything together

Beedub · Post by **Beedub** » Mon May 29, 2017 6:28 pm

///M friendly I'm guessing, if so... I'm in!

Z4-forum.com

Z4-forum.com