Custom Cruise Control Loom

Post by **srhutch** » Tue Jun 27, 2017 1:33 pm

85genius wrote: ↑Tue Jun 27, 2017 10:52 am
srhutch wrote: ↑Fri Jun 09, 2017 9:26 pm No, they are 3 pol which I can get cheap enough. I need 4 pol.
I've found em!

https://www.aliexpress.com/item/10-PCS- ... 7fad56cd5a

Just over a quid each!

Not Tyco made but has the correct part number 968813-1

Can't remember if I found that page or not.

Anyway I've ordered 10. as soon as they arrive I'll get on it.

Fingers crossed and cheers.

dan yeates · Post by **dan yeates** » Tue Jun 27, 2017 1:58 pm

I'm interested. I'd quite like to add cruise control to mine.

Crazy Harry · Post by **Crazy Harry** » Tue Jun 27, 2017 4:20 pm

srhutch wrote: ↑Tue Jun 27, 2017 1:33 pm
Anyway I've ordered 10. as soon as they arrive I'll get on it.

Sure that shouldn't have been 100! - the interested list is getting long and longer

nick_l · Post by **nick_l** » Tue Jun 27, 2017 7:17 pm

Do the looms need to be different for N46 engines? I'm sure I read somewhere that it is different.....This is next on my list of things to do....

Post by **srhutch** » Tue Jun 27, 2017 8:01 pm

nick_l wrote: ↑Tue Jun 27, 2017 7:17 pm Do the looms need to be different for N46 engines? I'm sure I read somewhere that it is different.....This is next on my list of things to do....

Looms the same, only difference will be for ///M's which will have a different connector on the lead to the Ecu.

Post by **srhutch** » Tue Jun 27, 2017 8:04 pm

Crazy Harry wrote: ↑Tue Jun 27, 2017 4:20 pm
srhutch wrote: ↑Tue Jun 27, 2017 1:33 pm
Anyway I've ordered 10. as soon as they arrive I'll get on it.

Sure that shouldn't have been 100! - the interested list is getting long and longer

Quite happily order more if there is demand. Want to minimise my outlay at this stage though.

DaiC · Post by **DaiC** » Tue Jun 27, 2017 11:49 pm

Hi I'll definitely have one from you ASAP ,, I can't wait to get CC installed, essential on today's average speed zones

nick_l · Post by **nick_l** » Wed Jun 28, 2017 7:05 am

srhutch wrote: ↑Tue Jun 27, 2017 8:01 pm
nick_l wrote: ↑Tue Jun 27, 2017 7:17 pm Do the looms need to be different for N46 engines? I'm sure I read somewhere that it is different.....This is next on my list of things to do....
Looms the same, only difference will be for ///M's which will have a different connector on the lead to the Ecu.

Cool. I'll defiantly have one off you then. I'll be happy to pay in advance if helps you recoup some of your costs sooner.

Post by **srhutch** » Wed Jun 28, 2017 1:09 pm

I'll start ordering the other parts and start a formal list of who wants one.

dan yeates · Post by **dan yeates** » Wed Jun 28, 2017 1:37 pm

Thanks. I will definitely have one, wanted to fit cruise control for ages now. Happy to pay up front.

philbo909 · Post by **philbo909** » Thu Jun 29, 2017 9:50 pm

very interested and also happy to pay up front, I miss cruise control on the motorway, boring journey makes for a heavy right foot

RyanB88 · Post by **RyanB88** » Thu Jun 29, 2017 11:37 pm

So just to confirm, all that's needed is the cruise control stalk and this custom loom?

If so where's the best place for the stalk - eBay I assume?

I'll have a custom loom

D4dawg · Post by **D4dawg** » Thu Jun 29, 2017 11:45 pm

I'd say bmw for stalk

bradz · Post by **bradz** » Fri Jun 30, 2017 8:09 am

I'll have one too for my Dads Si.

I fitted a bmw loom to my Si, I can't remember how much it was though.

step_change · Post by **step_change** » Fri Jun 30, 2017 10:26 am

Add me in. Money ready and waiting to bank xfer.

So all you need is this loom and a stalk and to cut the cowling? No need to start cutting into the wires of the car? That's my worry. If it all went pear shaped can just disconnect it and be back to where I was before.

CC almost mandatory nowadays there are so many cameras etc and I miss this greatly on my Si. Long jorneys are needlessly hard not having CC.

Z4-forum.com

Z4-forum.com