Post
by Machine monkey » Sat Sep 09, 2017 9:03 pm
Busy busy day at the monkey cave.
It's been 2 steps forward 1 back!
The turbo and oil system works ok after previous worrys about damaging it! It's not and the oil system works. The feed pump is a bit to powerful. I need something that provides less flow and lower presure. Or my bleed off system needs a bigger valve.
So all good. I swapped my droop links another job done. Then I started to conecting up the lines on the new rack! And the rack pump and resiviour are good. But the lines to connect it up?! Nope I have all sorts but not the right ones. So I need to order new ones. Then found that both return and feed pipes to the radiator both have issues. So not bad but still lots to do.
I did replace the blead nipples on the rear calipers with no problems witch is good news. Last time we did that in our workshop the casting broke on a caliper the night before a track day!!
My little blue zed is in lots of bits. With lots of things started and not many finished! I may have found the limits of my time and ability!!