Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Project Z4! [Updated: 25/06/17] (Picture Heavy)

2003 - 2009, roadster, coupe, facelift
User avatar
IAmOrion
Senior Member
Senior Member
Posts: 1611
Joined: Mon May 22, 2017 8:29 pm
Location: Cambridge, UK

Project Z4! [Updated: 25/06/17] (Picture Heavy)

Post by IAmOrion » Tue Jun 27, 2017 7:31 am

srhutch wrote: Tue Jun 27, 2017 6:55 am That wing had been off before for sure as one of the bolts was in the wrong way.

The top and bottom bolt in the door pillar should be removed from the pillar side. Only the middle one should be accessed from within the wing.
You confused me a little there!

I swear I read in one of your posts there was only 1 "outside" the wing in the door pillar?

It wouldn't surprise me that Wing having been removed before - I think the car was pretty abused before I got it lol
NO LONGER OWN A Z4 SO NOT AS ACTIVE HERE ANYMORE (IF AT ALL).
I STILL OFFER FREE CARLY CODING & EWS KEY/TRANSPONDER CODING AT MY HOME
IN CAMBRIDGE CB22

Facebook: https://www.facebook.com/groups/Z4DIYCustomMods/

User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Project Z4! [Updated: 25/06/17] (Picture Heavy)

Post by srhutch » Tue Jun 27, 2017 1:45 pm

I'd have to double check. Easy enouh to do, just need to open the door :lol:

You might want to check your drivers side.
Image

User avatar
IAmOrion
Senior Member
Senior Member
Posts: 1611
Joined: Mon May 22, 2017 8:29 pm
Location: Cambridge, UK

Project Z4! [Updated: 25/06/17] (Picture Heavy)

Post by IAmOrion » Tue Jun 27, 2017 4:58 pm

kis wrote: Mon Jun 26, 2017 11:51 pm Very nice! I like what you've done and will continue to follow with interest!

What are your next plans, double din aside? :)
My "what's left to do" list is:

A areas to touch up with a touch up pen. I'm not too fussed about making it perfect everywhere - it is a 14 year old car after all, so the few little scrapes I will touch up

Proper valet type service inside and out - it needs a bloody good clean inside & out !!

Aero Spoiler

Custom Headlights.... this is currently in the R&D stage. I've previously made custom lights for my old Saab & a few motorbikes. I realise these lights are a b*****d since they're cut and shut and you can't bake them - but I'll worry about that when I get to that stage. Will probs be in a month or so with everything else I've got going on atm
NO LONGER OWN A Z4 SO NOT AS ACTIVE HERE ANYMORE (IF AT ALL).
I STILL OFFER FREE CARLY CODING & EWS KEY/TRANSPONDER CODING AT MY HOME
IN CAMBRIDGE CB22

Facebook: https://www.facebook.com/groups/Z4DIYCustomMods/

Post Reply