spacers fitted

Rusky · Post by **Rusky** » Sat Jun 17, 2017 1:15 pm

So fitted my spacers and all good until the second outing. Now i have amber traction control and handbrake light on. Any ideas why? Will read fault codes wben i get home but has the spacers caused an issue? Any help appreciated.

RyanB88 · Post by **RyanB88** » Sat Jun 17, 2017 2:17 pm

Hmm seems a bit of a coincidence at least, but never heard of it before

Plug Carly in and see what it says.

On a side note - which spacers did you go for?

Rusky · Post by **Rusky** » Sat Jun 17, 2017 4:55 pm

ok the fault disappeared but did store a pressure sensor fault so cleared that down and will keep an eye on that, hope it was just a sensor that got disturbed and has sorted itself out.

12mm all round
Will post pics when photobucket stops messing me about

Rusky · Post by **Rusky** » Sat Jun 17, 2017 5:31 pm

[IMG]http://i1289.photobucket.com/albums/b51 ... rbcefv.jpg[/IMG]
Pic doesnt really show but it looks alot better.

RyanB88 · Post by **RyanB88** » Sat Jun 17, 2017 5:47 pm

Glad it's sorted now! Which spacers did you go for, they look nice fitted?

Rusky · Post by **Rusky** » Sat Jun 17, 2017 8:26 pm

RyanB88 wrote: ↑Sat Jun 17, 2017 5:47 pm Glad it's sorted now! Which spacers did you go for, they look nice fitted?

Bought MITEK in the end, seem to have a lot of positive reviews so went with them.

Rusky · Post by **Rusky** » Sat Jun 17, 2017 8:29 pm

[IMG]http://i1289.photobucket.com/albums/b51 ... 5bh1zy.jpg[/IMG]
This shows them better

DaiC · Post by **DaiC** » Sat Jun 17, 2017 8:58 pm

It'll be the pressure sensors adjacent to the brake fluid reservoir,,,, just pull pull connectors off individually & run diagnostic again to find out which is faulty
Item 2 on drawing

StuCracker · Post by **StuCracker** » Sat Jun 17, 2017 9:05 pm

Looks great, can I ask where you bought them from?

MACK · Post by **MACK** » Sat Jun 17, 2017 9:32 pm

DaiC wrote: ↑Sat Jun 17, 2017 8:58 pm It'll be the pressure sensors adjacent to the brake fluid reservoir,,,, just pull pull connectors off individually & run diagnostic again to find out which is faulty
Item 2 on drawing

dead easy to fit too. screw the old one out and the new one in, job done!

Rusky · Post by **Rusky** » Sat Jun 17, 2017 9:57 pm

StuCracker wrote: ↑Sat Jun 17, 2017 9:05 pm Looks great, can I ask where you bought them from?

ebay from their Mtek online shop

Rusky · Post by **Rusky** » Sat Jun 17, 2017 9:58 pm

MACK wrote: ↑Sat Jun 17, 2017 9:32 pm
DaiC wrote: ↑Sat Jun 17, 2017 8:58 pm It'll be the pressure sensors adjacent to the brake fluid reservoir,,,, just pull pull connectors off individually & run diagnostic again to find out which is faulty
Item 2 on drawing
dead easy to fit too. screw the old one out and the new one in, job done!

Thanks guys, the car is under a bmw warranty so they will be sorting it if it crops up again.

Marlon · Post by **Marlon** » Sat Jun 17, 2017 10:25 pm

looking good there Rusky

davros · Post by **davros** » Sun Jun 18, 2017 8:18 am

Great job Rusky. The cars looking very nice

Did the spacers come supplied with longer bolts or did you have to get them separately?

Rusky · Post by **Rusky** » Sun Jun 18, 2017 8:49 am

davros wrote: ↑Sun Jun 18, 2017 8:18 am Great job Rusky. The cars looking very nice
Did the spacers come supplied with longer bolts or did you have to get them separately?

Cheers dude, yep longer bolts included.

Z4-forum.com

Z4-forum.com

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted

spacers fitted