I'm just getting all the bits to do my ARB bushes and the drop links (stabilizer links)
Does anyone know what the torque values are for the bush brackets and the drop links?
I'm doing both front and rear, just need a sunny day next week.
Daz
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
ARB torque settings?
- dhobbs
- Senior Member
- Posts: 1621
- Joined: Mon Jul 16, 2012 5:33 pm
ARB torque settings?
3.0si roadster. Requisite stubby. Sound gen mod. LED numberplate lights. LED boot strip. Interior lights LED too. ZHP gearknob. Daily drive
Motor in boot. Bilstein B8 dampers. New radio, much better sounds
Motor in boot. Bilstein B8 dampers. New radio, much better sounds
- Steve84N
- Senior Member
- Posts: 1828
- Joined: Tue Jul 21, 2015 1:00 pm
ARB torque settings?
24nm and 59nm for the front iirc.
Rear is too tight to get a torque wrench on the drop links so just decently hand tight is fine. The brackets 24nm.
Rear is too tight to get a torque wrench on the drop links so just decently hand tight is fine. The brackets 24nm.
C63 AMG Estate 6208cc
- dhobbs
- Senior Member
- Posts: 1621
- Joined: Mon Jul 16, 2012 5:33 pm
ARB torque settings?
Thanks. Looking at all the diagrams it does look tight in the rear (o-er!)
Hand tight it is then.
Hand tight it is then.
3.0si roadster. Requisite stubby. Sound gen mod. LED numberplate lights. LED boot strip. Interior lights LED too. ZHP gearknob. Daily drive
Motor in boot. Bilstein B8 dampers. New radio, much better sounds
Motor in boot. Bilstein B8 dampers. New radio, much better sounds