Now doing "Bentley Style" flip keys for E85/6 cars.

2003 - 2009, roadster, coupe, facelift
Post Reply
User avatar
Ducklakeview
Lifer
Lifer
Posts: 4840
Joined: Tue Mar 22, 2016 4:08 pm
Location: Merseyside

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by Ducklakeview » Wed Aug 30, 2017 10:50 am

As above, I can now supply, cut and code a flip key for your E85/E86, as per the pic below;

Bought the cutting machine, which should be with me next week, as I need to do spares for my van and car, as well as some Mul-T-Lock keys for the house.
KEy.jpg
KEy.jpg (96.59 KiB) Viewed 1379 times
Cost is £75 all in.

Mike
Last edited by Ducklakeview on Wed Aug 30, 2017 11:12 am, edited 2 times in total.
Roof motor repairs/relocations and exhaust mods!
I can refurbish your VANOS and restore that mid-range grunt.
Contact me @ zed4mods@gmail.com

User avatar
jamie_z4
Senior Member
Senior Member
Posts: 2840
Joined: Fri Dec 31, 2010 9:38 pm

Now doing "Bentley Style" flip keys for pre-facelift cars.

Post by jamie_z4 » Wed Aug 30, 2017 10:51 am

Bargain Mike.

Same Service on ebay is £100 :thumbsup:
2005 Z4 3.0i SE Titan Silver/Pearl Grey - slightly lowered ;)

synthedup
Member
Member
Posts: 972
Joined: Tue Aug 13, 2013 7:11 pm
Location: Rotherham

Now doing "Bentley Style" flip keys for pre-facelift cars.

Post by synthedup » Wed Aug 30, 2017 11:10 am

Mike,

I don't have a spare key so this would be great.

Are you around on the 8th September? I am heading over to Leyland for an alignment from Sheffield and could swing round on the way back early afternoon.

Is it a long process for you?

greg81
Member
Member
Posts: 362
Joined: Thu Mar 02, 2017 6:33 pm

Now doing "Bentley Style" flip keys for pre-facelift cars.

Post by greg81 » Wed Aug 30, 2017 11:11 am

I'm in. What's your estimated turnaround time?

User avatar
jamie_z4
Senior Member
Senior Member
Posts: 2840
Joined: Fri Dec 31, 2010 9:38 pm

Now doing "Bentley Style" flip keys for pre-facelift cars.

Post by jamie_z4 » Wed Aug 30, 2017 11:11 am

synthedup wrote:
Wed Aug 30, 2017 11:10 am
Mike,

I don't have a spare key so this would be great.

Are you around on the 8th September? I am heading over to Leyland for an alignment from Sheffield and could swing round on the way back early afternoon.

Is it a long process for you?
ooh Leyland eh - wheres good in leyland for an alignment - news to me i live there :lol:
2005 Z4 3.0i SE Titan Silver/Pearl Grey - slightly lowered ;)

User avatar
Ducklakeview
Lifer
Lifer
Posts: 4840
Joined: Tue Mar 22, 2016 4:08 pm
Location: Merseyside

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by Ducklakeview » Wed Aug 30, 2017 11:12 am

synthedup wrote:
Wed Aug 30, 2017 11:10 am
Mike,

I don't have a spare key so this would be great.

Are you around on the 8th September? I am heading over to Leyland for an alignment from Sheffield and could swing round on the way back early afternoon.

Is it a long process for you?
5 mins to cut, same to code.

Mike
Roof motor repairs/relocations and exhaust mods!
I can refurbish your VANOS and restore that mid-range grunt.
Contact me @ zed4mods@gmail.com

User avatar
TomK
Senior Member
Senior Member
Posts: 1266
Joined: Fri Jan 25, 2013 11:50 pm
Location: Gloucestershire

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by TomK » Wed Aug 30, 2017 11:17 am

Can you do the normal style ones? I've managed to lose one of mine somehow :cry:
MC IB, CSL intake, Schrick 288/280 cams, SS race bbox, APs, RS-29s, Apex ARC-8, AD08-Rs, Bilstein B12, Turner arms & RTAB limiters, Vibratec mounts, Rogue pulleys & RSMs, Sparco carbon w/ 6 point, CDV delete, UUC ssk, M5 gearknob, oem strut

synthedup
Member
Member
Posts: 972
Joined: Tue Aug 13, 2013 7:11 pm
Location: Rotherham

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by synthedup » Wed Aug 30, 2017 11:22 am

jamie_z4 wrote:
Wed Aug 30, 2017 11:11 am
synthedup wrote:
Wed Aug 30, 2017 11:10 am
Mike,

I don't have a spare key so this would be great.

Are you around on the 8th September? I am heading over to Leyland for an alignment from Sheffield and could swing round on the way back early afternoon.

Is it a long process for you?
ooh Leyland eh - wheres good in leyland for an alignment - news to me i live there :lol:
A guy called Stevie @ grinspeed.

He is the UK research and development lead for Mfactor and is an ex ford rally engineer.

He does everything old school with fishing line and rulers lol

Been to him a few times and always very happy with the service and he always has some nice cards to look at.

https://www.facebook.com/search/top/?q= ... motorsport

synthedup
Member
Member
Posts: 972
Joined: Tue Aug 13, 2013 7:11 pm
Location: Rotherham

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by synthedup » Wed Aug 30, 2017 11:23 am

Ducklakeview wrote:
Wed Aug 30, 2017 11:12 am
synthedup wrote:
Wed Aug 30, 2017 11:10 am
Mike,

I don't have a spare key so this would be great.

Are you around on the 8th September? I am heading over to Leyland for an alignment from Sheffield and could swing round on the way back early afternoon.

Is it a long process for you?
5 mins to cut, same to code.

Mike
That's good.

generally what is your availability like? are you likely to be around on the 8th September? :driving:

User avatar
Ducklakeview
Lifer
Lifer
Posts: 4840
Joined: Tue Mar 22, 2016 4:08 pm
Location: Merseyside

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by Ducklakeview » Wed Aug 30, 2017 11:32 am

synthedup wrote:
Wed Aug 30, 2017 11:23 am
Ducklakeview wrote:
Wed Aug 30, 2017 11:12 am
synthedup wrote:
Wed Aug 30, 2017 11:10 am
Mike,

I don't have a spare key so this would be great.

Are you around on the 8th September? I am heading over to Leyland for an alignment from Sheffield and could swing round on the way back early afternoon.

Is it a long process for you?
5 mins to cut, same to code.

Mike
That's good.

generally what is your availability like? are you likely to be around on the 8th September? :driving:
Normally in the shop all day Friday, but not a problem as can bring the machine with me. Shop is actually closer to Leyland, 1 mile from M6 junction with A580. I'm there all day from 0930 until 2230 :(

Mike
Roof motor repairs/relocations and exhaust mods!
I can refurbish your VANOS and restore that mid-range grunt.
Contact me @ zed4mods@gmail.com

User avatar
jamie_z4
Senior Member
Senior Member
Posts: 2840
Joined: Fri Dec 31, 2010 9:38 pm

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by jamie_z4 » Wed Aug 30, 2017 11:34 am

synthedup wrote:
Wed Aug 30, 2017 11:22 am
jamie_z4 wrote:
Wed Aug 30, 2017 11:11 am
synthedup wrote:
Wed Aug 30, 2017 11:10 am
Mike,

I don't have a spare key so this would be great.

Are you around on the 8th September? I am heading over to Leyland for an alignment from Sheffield and could swing round on the way back early afternoon.

Is it a long process for you?
ooh Leyland eh - wheres good in leyland for an alignment - news to me i live there :lol:
A guy called Stevie @ grinspeed.

He is the UK research and development lead for Mfactor and is an ex ford rally engineer.

He does everything old school with fishing line and rulers lol

Been to him a few times and always very happy with the service and he always has some nice cards to look at.

https://www.facebook.com/search/top/?q= ... motorsport
ahh yes - round corner from me that :) Will bear it in mind! Doubt he could align mine though - youve seen it on insta :lol:
2005 Z4 3.0i SE Titan Silver/Pearl Grey - slightly lowered ;)

User avatar
Ducklakeview
Lifer
Lifer
Posts: 4840
Joined: Tue Mar 22, 2016 4:08 pm
Location: Merseyside

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by Ducklakeview » Wed Aug 30, 2017 11:35 am

TomK wrote:
Wed Aug 30, 2017 11:17 am
Can you do the normal style ones? I've managed to lose one of mine somehow :cry:
Yup, I have a few blanks here already for those - These have a replaceable CR2032 lithium battery, so no rechargeable to fail;
20170830_113403.jpg
20170830_113403.jpg (174.34 KiB) Viewed 1321 times
Mike
Roof motor repairs/relocations and exhaust mods!
I can refurbish your VANOS and restore that mid-range grunt.
Contact me @ zed4mods@gmail.com

User avatar
Number5
Lifer
Lifer
Posts: 4162
Joined: Tue Sep 24, 2013 7:34 pm
Location: Bristol & Swansea

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by Number5 » Wed Aug 30, 2017 11:37 am

Are you offering specialised Insurance yet for Z4's as I'm sure you'll be able to better Chris Knott Insurance ?

User avatar
Ducklakeview
Lifer
Lifer
Posts: 4840
Joined: Tue Mar 22, 2016 4:08 pm
Location: Merseyside

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by Ducklakeview » Wed Aug 30, 2017 11:42 am

Number5 wrote:
Wed Aug 30, 2017 11:37 am
Are you offering specialised Insurance yet for Z4's as I'm sure you'll be able to better Chris Knott Insurance ?
LOL!!!!

Mike
Roof motor repairs/relocations and exhaust mods!
I can refurbish your VANOS and restore that mid-range grunt.
Contact me @ zed4mods@gmail.com

User avatar
ggmiller
Member
Member
Posts: 203
Joined: Fri May 01, 2009 12:47 pm
Location: Chester
Contact:

Now doing "Bentley Style" flip keys for E85/6 cars.

Post by ggmiller » Wed Aug 30, 2017 11:50 am

They look great, i'll sort one asap.

Can you do the blank and cut/code to an e46 as well? ( I think they're the same blank but happy to be corrected!)

I mean the BMW shape one btw for the e46.

Cheers,

Glenn

Post Reply

Who is online

Users browsing this forum: Danz4coupe, Z4LEE and 21 guests