///M Cruise Control - Myths & Legends Busted - Retrofit DIY HOW TO!!

[2dogs]

Top work Steve, off to buy a cc stick that can sit in my garage for two years before fitting
BTW Steve you need to update your signature

[Scooba_Steve]

Pin 4 doesn't connect to anything at x6021 so yes you could. TBH it's easier to connect there than pull the Ecu out though.

Where is X60002 on the M? Hard to run the cable to?

[srhutch]

Pin 4 doesn't connect to anything at x6021 so yes you could. TBH it's easier to connect there than pull the Ecu out though.

Where is X60002 on the M? Hard to run the cable to?

I wondered about some of your posts, and can see the confusion now.

The car is already wired up from X60002 Pin 4 to X6021 Pin 4.

The blue lead from the CC loom just needs to connect to it somehere. Where I have connected is the easiest way, but if the correct male pin can be sourced then you could plug into X6021 Pin 4 and have more OEM look.

[srhutch]

Top work Steve, off to buy a cc stick that can sit in my garage for two years before fitting
BTW Steve you need to update your signature

Done, but run out of room. Might have to construct a JPG with all the info in.

[pvr]

Especially if you include the work in progress ones

[srhutch]

Especially if you include the work in progress ones

There aren't any

[paulgs1000]

Well, I need to sit down and read everything carefully again but it's great to know that it can be fitted on the M and works without coding. I'm awaiting delivery of my stalk and loom from Sopers (stalk in stock, loom on order). I have it booked in at my specialist on the 23rd for MOT and CC fitment. I'll let you know how this turns out
Thanks to all for the long effort put in to sort this out . . .

[Beedub]

YESSSSSSSSSS!!!!!!!! YESSSSSS!!!!!!!

Well done man!! impressed!
now searching for the needed parts!

[srhutch]

Well, I need to sit down and read everything carefully again but it's great to know that it can be fitted on the M and works without coding. I'm awaiting delivery of my stalk and loom from Sopers (stalk in stock, loom on order). I have it booked in at my specialist on the 23rd for MOT and CC fitment. I'll let you know how this turns out
Thanks to all for the long effort put in to sort this out . . .

Paul

If you need any clarification give me a shout.

[MrPT]

Heroic. Was going to try and figure this out myself, but it could have taken another couple of years!

[pvr]

but it could have taken another couple of years!

Are you related to Steve?

[beanie]

Well done for taking the plunge and getting it working

[D4dawg]

Great stuff buddy

May attempt for those arsing ave speed cameras!

[srhutch]

Great stuff buddy

May attempt for those arsing ave speed cameras!

One of the main reason for me.

[bmwaddict]

Great stuff buddy

May attempt for those arsing ave speed cameras!

One of the main reason for me.

And me! Bloody M1 50mph zone drives me mad!