Has it got the plastic thingy on the back? If so you don't need that, should be able to remove and then stick the glass with a decent expoxy glue or double side stickers. Should be OK.BeemerMad wrote:I have bought the whole replacement now. Is it easy to do the whole thing?Lillywhite wrote:The black backing is the heated pad. All you need is a replacement piece of glass, a tenner or so off eBay. Wingmirrorman supplied mine.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
How do replace a wing mirro glass
- Lillywhite
- Senior Member
- Posts: 1558
- Joined: Wed Sep 14, 2011 7:33 pm
- Location: Welland Valley
Re: How do replace a wing mirro glass
2015 Mazda MX-5 Roadster Coupe 25th Anniversary Limited Edition (#0195), personal number plate
2005 Series 1 116i Sport, Titan silver, personal number plate
2005 Series 1 116i Sport, Titan silver, personal number plate
- BeemerMad
- Member
- Posts: 624
- Joined: Mon Aug 20, 2012 1:33 pm
Re: How do replace a wing mirro glass
Hi yes it comes with the black plastic clip. If i use sticky pads and stick it in, will it not affect the mirror heating up?
- Lillywhite
- Senior Member
- Posts: 1558
- Joined: Wed Sep 14, 2011 7:33 pm
- Location: Welland Valley
Re: How do replace a wing mirro glass
Mine is fixed with sticky pads that were supplied with the replacement glass and it works fine. Many on this forum use expoxy glue but make sure that it's better than the c**p glue that was orginally used by BMW OEM!BeemerMad wrote: If i use sticky pads and stick it in, will it not affect the mirror heating up?
![Thumbs Down :thumbsdown:](./images/smilies/smilie_bad.gif)
2015 Mazda MX-5 Roadster Coupe 25th Anniversary Limited Edition (#0195), personal number plate
2005 Series 1 116i Sport, Titan silver, personal number plate
2005 Series 1 116i Sport, Titan silver, personal number plate
- BeemerMad
- Member
- Posts: 624
- Joined: Mon Aug 20, 2012 1:33 pm
Re: How do replace a wing mirro glass
Thats great thanks. Thankyou all for your replies.Lillywhite wrote:Mine is fixed with sticky pads that were supplied with the replacement glass and it works fine. Many on this forum use expoxy glue but make sure that it's better than the c**p glue that was orginally used by BMW OEM!BeemerMad wrote: If i use sticky pads and stick it in, will it not affect the mirror heating up?
Its quite difficult driving on a motorway with no drivers side mirror!!!
Does your mirror still defrost after using sticky pads?
- Lillywhite
- Senior Member
- Posts: 1558
- Joined: Wed Sep 14, 2011 7:33 pm
- Location: Welland Valley
Re: How do replace a wing mirro glass
YesBeemerMad wrote:
Does your mirror still defrost after using sticky pads?
2015 Mazda MX-5 Roadster Coupe 25th Anniversary Limited Edition (#0195), personal number plate
2005 Series 1 116i Sport, Titan silver, personal number plate
2005 Series 1 116i Sport, Titan silver, personal number plate
- BeemerMad
- Member
- Posts: 624
- Joined: Mon Aug 20, 2012 1:33 pm
Re: How do replace a wing mirro glass
Would UHU glue be suffice?
- BeemerMad
- Member
- Posts: 624
- Joined: Mon Aug 20, 2012 1:33 pm
Re: How do replace a wing mirro glass
Thanking youLillywhite wrote:YesBeemerMad wrote:
Does your mirror still defrost after using sticky pads?
- Lillywhite
- Senior Member
- Posts: 1558
- Joined: Wed Sep 14, 2011 7:33 pm
- Location: Welland Valley
Re: How do replace a wing mirro glass
Not something I would use, some have used Araldite although I didn't want to trust glue again because the reason many mirrors fall out is because the glue gets brittle.BeemerMad wrote:Would UHU glue be suffice?
2015 Mazda MX-5 Roadster Coupe 25th Anniversary Limited Edition (#0195), personal number plate
2005 Series 1 116i Sport, Titan silver, personal number plate
2005 Series 1 116i Sport, Titan silver, personal number plate
- BeemerMad
- Member
- Posts: 624
- Joined: Mon Aug 20, 2012 1:33 pm
Re: How do replace a wing mirro glass
Hmmm, could you recommend some double sided sticky pads then please. Thickness more than anything cheersLillywhite wrote:Not something I would use, some have used Araldite although I didn't want to trust glue again because the reason many mirrors fall out is because the glue gets brittle.BeemerMad wrote:Would UHU glue be suffice?
- BeemerMad
- Member
- Posts: 624
- Joined: Mon Aug 20, 2012 1:33 pm
Re: How do replace a wing mirro glass
Got some now about 2mm thick. Thankyou Lillywhite for your help greatly appreciated ![Thumbs Up :thumbsup:](./images/smilies/smilie_thumbsup.gif)
![Thumbs Up :thumbsup:](./images/smilies/smilie_thumbsup.gif)
- TiffAnsell
- Member
- Posts: 99
- Joined: Thu Jul 10, 2014 1:08 pm
- Location: Bromley, Kent
Re: How do replace a wing mirro glass
My passenger side glass fell off on the way from kent to Poole... Used silicone and it seems fine now, heats up well too. Only thing is it has abviously come off before as the passenger side isn't the same as the drivers which now I've noticed, really bugs me
3.0 2006 build 2007 reg coupe. "burnished" gold rep csl rims on goodyears