Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Bonnet won't open - again!

Discuss problems you have had or are having with your Z4
Post Reply
User avatar
bluespit
Senior Member
Senior Member
Posts: 1314
Joined: Fri Dec 23, 2011 1:01 am
Location: Near Chester

Bonnet won't open - again!

Post by bluespit » Wed Mar 22, 2017 9:44 pm

usual thing, pull the bonnet release and nothing.

quick searching on here and theres a trick of pulling the release and carefully pounding on the bonnet front. Tried it and eventually it worked. Cleaned and sprayed the mechanism with WD40 and grease. Tried it several times and everything free and fine. Closed the bonnet and its stuck again.

OK I can jiggle it open again but is there a more permanent solution?

Thanks
now I'm about to have more time I've suddenly got less toys to play with!

User avatar
Smartbear
Lifer
Lifer
Posts: 13685
Joined: Wed Feb 05, 2014 6:54 pm
Location: a barn in Somerset

Bonnet won't open - again!

Post by Smartbear » Wed Mar 22, 2017 9:47 pm

bluespit wrote:usual thing, pull the bonnet release and nothing.

quick searching on here and theres a trick of pulling the release and carefully pounding on the bonnet front. Tried it and eventually it worked. Cleaned and sprayed the mechanism with WD40 and grease. Tried it several times and everything free and fine. Closed the bonnet and its stuck again.

OK I can jiggle it open again but is there a more permanent solution?

Thanks
Have you tried adjusting the bonnet stops? Sounds like they may be exerting to high a force on the latches when the bonnets closed, making it difficult to release.
Try winding them in to give a little more clearance.
Rob
Image

e89 Sdrive 20i, plenty of mumbo & good economy-the thinking bears z4
e89 Sdrive 30i, this ones busted, pass me another...
e85 3.0si sold

User avatar
bluespit
Senior Member
Senior Member
Posts: 1314
Joined: Fri Dec 23, 2011 1:01 am
Location: Near Chester

Bonnet won't open - again!

Post by bluespit » Wed Mar 22, 2017 9:53 pm

no I haven't but I will when I get it open again, probably at the weekend now

cheers
now I'm about to have more time I've suddenly got less toys to play with!

User avatar
scott202
Newbie
Newbie
Posts: 25
Joined: Fri Nov 11, 2016 10:14 pm
Location: Devon, UK

Bonnet won't open - again!

Post by scott202 » Wed Mar 22, 2017 10:01 pm

I was about to buy a new one but decided to have one last go at getting it to work. I took it off and cleaned it thoroughly with a toothbrush and WD40, before coating it in lithium grease and reattaching it.

Touch wood it has worked fine since!
Image
2004 E85 Z4 3.0i / Stirling Grey / Xenons / M-Sport Suspension / New England Leather / Carver DSP / Navigation / Intravee II

User avatar
bluespit
Senior Member
Senior Member
Posts: 1314
Joined: Fri Dec 23, 2011 1:01 am
Location: Near Chester

Bonnet won't open - again!

Post by bluespit » Wed Mar 22, 2017 10:15 pm

how did you get it off?
now I'm about to have more time I've suddenly got less toys to play with!

User avatar
gannet
Lifer
Lifer
Posts: 10086
Joined: Mon Nov 26, 2007 11:45 am
Location: Surrey

Bonnet won't open - again!

Post by gannet » Wed Mar 22, 2017 10:43 pm

BMW replaced mine at some point, I think outside of warranty too :(
-- Gannet.
Current: MINI JCW... - Modification: Driver Upgraded :D
Previous: DS3 DSport, Z4 3.0SE, 206 GTi & XS, Alfa 147 Lusso

Lance
Member
Member
Posts: 973
Joined: Tue Apr 27, 2010 8:04 pm
Location: Northants

Bonnet won't open - again!

Post by Lance » Thu Mar 23, 2017 8:57 am

When you pull the bonnet release lever, is there any resistance, as in it's trying to release the catch? Or is the lever loose as if it's attached to nothing?

If the latter, I had this issue a couple of years back, was this..........The bonnet release cable is in two parts, first goes from the lever to a small junction box that's located just in front of the water bottle (mines a 2003 2.5), standing at the front looking into the engine bay it's clearly accessible and visible behind the top of the headlight and in front of the water bottle. Within the junction box is a small sliding mechanism to which the release cable attaches to, the second cable to the bonnet is attached to the same mechanism. However, on mine the junction box became detached from the body work and therefore the inner gubbings couldn't work as the whole unit was moving. Simply reattached to the body and all was well again.

Good luck.

User avatar
bluespit
Senior Member
Senior Member
Posts: 1314
Joined: Fri Dec 23, 2011 1:01 am
Location: Near Chester

Bonnet won't open - again!

Post by bluespit » Thu Mar 23, 2017 11:39 pm

Thanks Lance,
That's exactly how mine feels, I'll take a look at the weekend and see what's what.
Cheers
now I'm about to have more time I've suddenly got less toys to play with!

User avatar
scott202
Newbie
Newbie
Posts: 25
Joined: Fri Nov 11, 2016 10:14 pm
Location: Devon, UK

Bonnet won't open - again!

Post by scott202 » Fri Mar 24, 2017 12:13 am

bluespit wrote:how did you get it off?
Front grill off then there's 4 screws holding it in place (2 from the top, 2 visible from behind the grill) :thumbsup:
Image
2004 E85 Z4 3.0i / Stirling Grey / Xenons / M-Sport Suspension / New England Leather / Carver DSP / Navigation / Intravee II

User avatar
bluespit
Senior Member
Senior Member
Posts: 1314
Joined: Fri Dec 23, 2011 1:01 am
Location: Near Chester

Bonnet won't open - again!

Post by bluespit » Sat Mar 25, 2017 11:41 am

Scott and lance. Both on the money. Mech full of crap, soaking in cleaner. Cable junction loose. Thinking of belt and braces solution. Cable tie, super glue? Not sure yet.

Will post back later. Enjoying the sunshine now. Romp up model fammau first.
now I'm about to have more time I've suddenly got less toys to play with!

User avatar
cj10jeeper
Lifer
Lifer
Posts: 17846
Joined: Fri Jun 22, 2007 11:50 am
Location: Lichfield, England

Bonnet won't open - again!

Post by cj10jeeper » Sat Mar 25, 2017 12:18 pm

Just a couple of pointers that may help once opened

Don't use WD40 at all it's a water dispersant and in time will just solidify and make it even harder to open. Use grease

If you look where the cable comes up to the lock you'll see the outer sheath comes up to a U shaped holder. If you bend the prongs slightly downwards it takes any slack out of the cable and if greased as above will work perfectly forever more

If you have the old style solid rubber adjusters on each side they can be replaced by a fairly cheap later BMW version that is spring loaded. They ensure correct pressure
Jaguar F-Type 3.0 Supercharged V6 S, Stratus Grey, LSD, Active Exhaust, CF wheels, Performance brakes, Sports seats and mods ongoing
Gone but not forgotten Z4 3.0i SE Roadster ///M front, Red ///M leather seats, Aero sills

User avatar
bluespit
Senior Member
Senior Member
Posts: 1314
Joined: Fri Dec 23, 2011 1:01 am
Location: Near Chester

Bonnet won't open - again!

Post by bluespit » Sat Mar 25, 2017 5:56 pm

All done, Mech cleaned and lubricated, Tang slightly bent outwards, junction unit refitted and cable tied for extra security.

Bonnet open easily now - its just a bugger to shut instead!
now I'm about to have more time I've suddenly got less toys to play with!

Post Reply