Error code

PhilinZ4 · Post by **PhilinZ4** » Tue Apr 25, 2017 5:52 pm

Hi, I've just run DIS and INPA on my coupe and am getting the error code 2FAF Coding Missing. Anybody know what coding it refers too?

mac27040 · Post by **mac27040** » Wed May 03, 2017 4:40 pm

not heard of that code

Rufus59 · Post by **Rufus59** » Wed May 03, 2017 6:41 pm

Which module is it stored in? Has it thrown any warning lights up? Did you change anything prior to this or was this just the first scan?

PhilinZ4 · Post by **PhilinZ4** » Wed May 03, 2017 11:10 pm

here's a screen grab, first scan, nothing changed, no lights. I'm wondering if a remap has taken place in the past by a previous owner.

[IMG]http://i44.photobucket.com/albums/f31/p ... wxcu60.jpg[/IMG]

PhilinZ4 · Post by **PhilinZ4** » Wed May 03, 2017 11:11 pm

My original 2FAF was a typo...sorry

Rufus59 · Post by **Rufus59** » Thu May 04, 2017 10:22 am

I'm by no means an expert but that looks like it occurred whilst the engine was off and was a one off event. Clear it and run it for a week, if it doesn't come back - happy days

vester86 · Post by **vester86** » Thu May 04, 2017 12:37 pm

looks something involved with coding/programming the DME

https://www.google.nl/search?q=2fa3+err ... &oe=#spf=1

mac27040 · Post by **mac27040** » Fri May 05, 2017 8:13 am

Most say this

It's a common shadow code on flashed cars...don't worry about it.

PhilinZ4 · Post by **PhilinZ4** » Fri May 05, 2017 8:29 pm

Cheers, I wasn't worried, would just like to know what flash had been done as it feels a bit sluggish at the bottom end of the range. New Vanos filters and cleaned/replaced solenoids will hopefully fix that though.

Z4-forum.com

Z4-forum.com

Error code

Error code

Error code

Error code

Error code

Error code

Error code

Error code

Error code

Error code