Yesterday my Z4 came up with an permanent airbag warning light. I purchased a C110 code tool today and identified an error code with the SRS, the code was 93E7 Undervoltage.
I cleared the error code, turned off the ignition then back on again, but the airbag light is still on. I reconnected the C110, went back to the SRS unit and diagnosed expecting to find the same error code indicating a permanent fault, but there are now no error codes on SRS, but I still get a warning. Has anyone any ideas?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Airbag warning stays on after clearing code 93E7
- Magicarcher
- Member
- Posts: 543
- Joined: Fri Jun 17, 2016 9:12 pm
- Location: Warwickshire
Airbag warning stays on after clearing code 93E7
Z4 3.0L 2005. Titan Silver. Audio Upgrade Second Stereo Pioneer X8700DAB, Sony Xplode 4 x 70W Amp, 6.5" Reckhorn Subs in rear cubby, Focal AS165-3 in fronts.
-
- Member
- Posts: 371
- Joined: Sun Jan 10, 2016 8:20 am
- Location: Chesterfield UK
Airbag warning stays on after clearing code 93E7
This is a common problem with cheap code readers. Software not compatible and doesn't read the codes properly.
Needs a good quality scanner to be sure the codes are valid.
If the light is on, there IS a code stored.
You have a low voltage somewhere in the system. This could easily be the result of a low battery voltage or weak/old battery or connections.
Need to look at live data to be sure, and do a bit of poking around! (not literallY!).
Andy.
Needs a good quality scanner to be sure the codes are valid.
If the light is on, there IS a code stored.
You have a low voltage somewhere in the system. This could easily be the result of a low battery voltage or weak/old battery or connections.
Need to look at live data to be sure, and do a bit of poking around! (not literallY!).
Andy.
-
- Member
- Posts: 242
- Joined: Wed Apr 27, 2016 5:00 pm
- Location: Oxfordshire, UK
Airbag warning stays on after clearing code 93E7
I had a recent battle to remove an airbag error.
See this thread viewtopic.php?f=3&t=95618
Like you, code readers were not doing it. But I wiped the error for good with the DIS GT1 on my laptop using my K-line cable from Bcables.
See this thread viewtopic.php?f=3&t=95618
Like you, code readers were not doing it. But I wiped the error for good with the DIS GT1 on my laptop using my K-line cable from Bcables.
__________
2003 Z4 3.0i, titan silver with black leather, DLV exhaust, Royal steering wheel retrim.
2003 Z4 3.0i, titan silver with black leather, DLV exhaust, Royal steering wheel retrim.
- mac27040
- Lifer
- Posts: 3511
- Joined: Wed Oct 26, 2011 5:17 pm
- Location: Shepshed
Airbag warning stays on after clearing code 93E7
check battery try charging it up and then clear code, also some readers wont clear light. You need DIS v57 or INPA
3.0i SMG Supercharged,19" CSL, AvinUSA android 10.25” screen,DSP,M6 gearknob,Coilovers,Aero F-bumper,M r-bumper,Aero skirts,Facelift front & rear lights,M sports seats,Carbon Steering wheel,Intravee,Rervese cam,Hydrographics
-
- Member
- Posts: 73
- Joined: Wed Jan 25, 2017 1:50 am
Airbag warning stays on after clearing code 93E7
probably a bit late now nut there is another submenu where the airbag codes are hidden and need to be cleared too - or the light wont go out....
see this thread > viewtopic.php?f=3&t=87337
see this thread > viewtopic.php?f=3&t=87337