Hi everyone
The airbag light has come on on my Z4 and I have been unable to clear it.
I have read the codes and have the following
98B5 no message (ox9) from safety and information module(E85) or vehicle centre satellite (E6x) SBSR reciever SFZ transmitter
98B7 no message (oxb) from B-pillar satellite left, SBSR receiver SBSL transmitter
The second one seems to refer to the module in the b pillar on the passenger side. However does any body know what the first one is on about, or is it just a generic code still related to the faulty module in the B pillar?
Also does anybody know if I picked up a second hand module for the b pillar would it be plug and play or are they all coded the the vehicle?
Cheers
Stu
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Air Bag Light 2003 2.5i
- mac27040
- Lifer
- Posts: 3511
- Joined: Wed Oct 26, 2011 5:17 pm
- Location: Shepshed
Air Bag Light 2003 2.5i
first have you checked under seat that the big yellow connector is connected? second check wires from seat belt pre-tensioner are ok and you haven't trapped them.
Check under carpet, there is a join under rear of seat for damp, If wet then check roof drain holes as this might cause water ingress into cabin and onto SBSR module which is located under carpet rear corner of inner cill.
Check under carpet, there is a join under rear of seat for damp, If wet then check roof drain holes as this might cause water ingress into cabin and onto SBSR module which is located under carpet rear corner of inner cill.
3.0i SMG Supercharged,19" CSL, AvinUSA android 10.25” screen,DSP,M6 gearknob,Coilovers,Aero F-bumper,M r-bumper,Aero skirts,Facelift front & rear lights,M sports seats,Carbon Steering wheel,Intravee,Rervese cam,Hydrographics
-
- Newbie
- Posts: 3
- Joined: Wed Aug 02, 2017 9:43 pm
Air Bag Light 2003 2.5i
Thanks for that I'll have a good look this weekend and let you know how I get on.
-
- Newbie
- Posts: 25
- Joined: Sat Oct 15, 2022 3:36 pm
Air Bag Light 2003 2.5i
Would like to know if op solved the issue, I’m having comms issues with the lh b pillar module, sometimes I can see it, but mostly not. Found water under the passengers seat today so I’m guessing my wiring/module are getting wet…. Will try and get the seat out this weekend, dry and clean everything off and see if the connection is better.