How to change your DISA Adjuster Unit (video)

Post Reply
User avatar
syphic
Newbie
Newbie
Posts: 6
Joined: Tue Oct 14, 2008 3:37 am
Location: Los Angeles
Contact:

How to change your DISA Adjuster Unit (video)

Post by syphic » Wed Jan 12, 2011 1:11 am

Made a quick video on how to remove and replace this part. Hope this helps someone out!

http://www.youtube.com/watch?v=T2Qo47eknoA

Gee
Member
Member
Posts: 103
Joined: Sat Jan 30, 2010 6:18 pm
Location: Aberdeen

Re: How to change your DISA Adjuster Unit (video)

Post by Gee » Wed Jan 12, 2011 9:32 pm

Hmm this could come in useful. I might have to take my one out and check it now!

Good work on the video :thumbsup:
2004 Alpina Roadster S

User avatar
PawnSacrifice
Lifer
Lifer
Posts: 3192
Joined: Wed Sep 30, 2009 9:21 pm
Location: South Oxfordshire

Re: How to change your DISA Adjuster Unit (video)

Post by PawnSacrifice » Thu Jan 13, 2011 1:36 am

syphic, not a regular poster I see, but when you do it counts! Great video, didn't even matter too much when it got dark.

The great thing was seeing the difference between the old and new units.

Embedded it for you...


:thumbsup:
2003 2.5i. Info: Winter Tyres | PDF Manuals, Retrofit Instructions and Links | Modifications | YouTube | #Project924

Hey, wet-pants! This isn't the Womens Auxiliary Balloon Corps.

Lance
Member
Member
Posts: 660
Joined: Tue Apr 27, 2010 8:04 pm
Location: Northants

Re: How to change your DISA Adjuster Unit (video)

Post by Lance » Mon May 09, 2011 6:45 pm

Mr Syphic, top man! Thanks for the video.

Just removed and cleaned my DISA, 15 minutes start to finish. If you can change a wheel, you can do this. The torx fitting is a T40.

My car has done 66k, not sure if it's been changed before, but mine wasn't particularly dirty and although there was a little play in the flappy thing, it didn't give me any cause for concern.

Tip, remove the airbox lid, MAF and middle hose as one, just unplug the MAF connector. This gives max access to the lower DISA bolt.

Loads of access to the idle control valve, which I will attempt at the weekend, at a guess, another 20 mins.

User avatar
bigshurv
Senior Member
Senior Member
Posts: 1514
Joined: Fri Aug 08, 2008 2:09 pm
Location: Northampton

Re: How to change your DISA Adjuster Unit (video)

Post by bigshurv » Mon Aug 29, 2011 3:25 pm

Brilliant, Mine's just started rattling over the weekend.Off to my local BMW stealer in the morning.................This looks like a really easy install. :thumbsup:

Lance
Member
Member
Posts: 660
Joined: Tue Apr 27, 2010 8:04 pm
Location: Northants

Re: How to change your DISA Adjuster Unit (video)

Post by Lance » Mon Aug 29, 2011 5:28 pm

Big, this really is an easy job. PM me if you need a hand.

Cheers

User avatar
BluZiff
Member
Member
Posts: 198
Joined: Tue Nov 30, 2010 1:17 pm
Location: Reading ish

Re: How to change your DISA Adjuster Unit (video)

Post by BluZiff » Sun Dec 02, 2012 1:23 am

Hmmm having a first look at mine tomorrow, 63k on the clock, hopefully its not proper knackered!
3.0i Titanium Silver Roadster, Top down and proud!

Gerry
Member
Member
Posts: 372
Joined: Sat May 01, 2010 11:03 am

How to change your DISA Adjuster Unit (video)

Post by Gerry » Mon Mar 21, 2016 11:02 pm

Great stuff ! My DISA has developed the 'rattle', can't decide on a new DISA or get the rebuild kit , any guidance would be apriciated .
Cars done 125000 miles.
2.5 Maldives Blue, tottaly original , no mods,

User avatar
Liam-O
Senior Member
Senior Member
Posts: 1693
Joined: Tue Apr 05, 2011 9:29 pm
Location: Solihull

How to change your DISA Adjuster Unit (video)

Post by Liam-O » Tue Mar 22, 2016 12:54 am

Brilliant video, as said, the comparison is the best part.
Liam - O

2005 Z4 2.2SE Grey

:rtfm: HOW TO: Fitting a Z4M Bumper

User avatar
cj10jeeper
Moderator
Moderator
Posts: 17578
Joined: Fri Jun 22, 2007 11:50 am
Location: Lichfield, England

How to change your DISA Adjuster Unit (video)

Post by cj10jeeper » Tue Mar 22, 2016 4:56 pm

Ok - while good that it shows the parts, it's a shame that he uses crappy tools, quotes the wrong size torx and takes no precaution about dropping bolts into the engine via removed hoses.
Follow, but take care..
Jaguar F-Type 3.0 Supercharged V6 S, Stratus Grey, LSD, Active Exhaust, CF wheels, Performance brakes, Sports seats and mods ongoing
Gone but not forgotten Z4 3.0i SE Roadster ///M front, Red ///M leather seats, Aero sills

Gerry
Member
Member
Posts: 372
Joined: Sat May 01, 2010 11:03 am

How to change your DISA Adjuster Unit (video)

Post by Gerry » Sun Apr 03, 2016 11:11 pm

Fitted a new DISA , rattle gone ,cars purring like a kitten ,I'm sure its running the same as it was 80000 miles ago lol , however I'm sure that's all in my head . :driving:
2.5 Maldives Blue, tottaly original , no mods,

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest