High beams much too high

Busterboo · Post by **Busterboo** » Tue Dec 06, 2016 3:09 am

Forgive the newbie question. How can I lower the high beams?

Not only are the low beams too low, but the high beams are much too high.

I've found, I believe, the low beam adjusters, but not the high.

Smartbear · Post by **Smartbear** » Tue Dec 06, 2016 6:39 am

Hi, the under bonnet adjusters work for both high & low beams I think-they are the white plastic hex heads behind the lights, one is up/down, the other left/right.
Rob

flybobbie · Post by **flybobbie** » Tue Dec 06, 2016 8:29 am

No way to adjust high beams, just have to accept that half the light is above the horizon.
I'm assuming the dipper is just a shutter that cuts off half the light.
The adjuster just raises or lower the body of the lamp?
Good in tunnels I suppose.

InvisibleName · Post by **InvisibleName** » Tue Dec 06, 2016 9:33 am

Xenon or 'standard'??

Busterboo · Post by **Busterboo** » Tue Dec 06, 2016 9:53 am

Xenon.

Maniac · Post by **Maniac** » Tue Dec 06, 2016 7:23 pm

E89 is always Xenon. I thought high beams were just that.. high. I.e. They illuminate everything.

*AL* · Post by ***AL*** » Tue Dec 06, 2016 8:44 pm

I find my high beam, well 'high' as they illuminate everything.

Z4Rick · Post by **Z4Rick** » Tue Dec 06, 2016 8:50 pm

Larger diameter rear tires.....

Z4-forum.com

Z4-forum.com