Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Rough cold start with 35is

Ozie
Member
Member
Posts: 53
Joined: Fri Jul 26, 2013 7:32 am
Location: Espoo, Finland

Rough cold start with 35is

Post by Ozie » Fri Nov 03, 2017 4:55 pm

Z4M-2006 wrote: Wed Nov 01, 2017 10:09 am Yea,

Classic HPFP problem
Thanks. Got also new symptom... :roll:

If I try to accelerate harder car starts to "shake" bit like hitting the rev limiter. No warning lights and no fault codes. Earlier got few codes from same aymptom: Instrument Cluster shutdown A559 and Motor Control - ECU 55 "sorry, unknown DTC fault" 00DE51. I mean is this also HPFP problems or something else?

Z4M-2006
Lifer
Lifer
Posts: 7020
Joined: Fri Jun 29, 2012 7:53 am
Location: High Peak,Derbyshire.

Rough cold start with 35is

Post by Z4M-2006 » Fri Nov 03, 2017 5:11 pm

The HPFP sounds like its faulting and dropping pressure,under demand the fuel pressure is dropped to the injectors and misfires start to happen.

User avatar
tomscott
Lifer
Lifer
Posts: 7466
Joined: Mon Sep 19, 2011 12:26 pm
Location: Manchester
Contact:

Rough cold start with 35is

Post by tomscott » Fri Nov 03, 2017 5:32 pm

Another with injector issues :cry:

Z4M-2006
Lifer
Lifer
Posts: 7020
Joined: Fri Jun 29, 2012 7:53 am
Location: High Peak,Derbyshire.

Rough cold start with 35is

Post by Z4M-2006 » Fri Nov 03, 2017 6:42 pm

All "N" derived engines have injector problems...

Dont have to have double windmills on em

Ozie
Member
Member
Posts: 53
Joined: Fri Jul 26, 2013 7:32 am
Location: Espoo, Finland

Rough cold start with 35is

Post by Ozie » Wed Nov 22, 2017 6:55 pm

HPFP was replaced yesterday. Ignition is now much faster and better. Starts after first crank. No error codes while accelerate. Total cost was about 950 €/ $1120 / £850.

Still noticed vibration when tried to accelerate uphill with 7th gear from 40 mph to 60 mph. More in here viewtopic.php?f=45&t=89585

Z4M-2006
Lifer
Lifer
Posts: 7020
Joined: Fri Jun 29, 2012 7:53 am
Location: High Peak,Derbyshire.

Rough cold start with 35is

Post by Z4M-2006 » Wed Nov 22, 2017 7:15 pm

Is it bringing EML on ?

Coil packs or vanos actuators would be my next thing..

User avatar
Smartbear
Lifer
Lifer
Posts: 13685
Joined: Wed Feb 05, 2014 6:54 pm
Location: a barn in Somerset

Rough cold start with 35is

Post by Smartbear » Wed Nov 22, 2017 7:20 pm

Ozie wrote: Wed Nov 22, 2017 6:55 pm HPFP was replaced yesterday. Ignition is now much faster and better. Starts after first crank. No error codes while accelerate. Total cost was about 950 €/ $1120 / £850.

Still noticed vibration when tried to accelerate uphill with 7th gear from 40 mph to 60 mph. More in here viewtopic.php?f=45&t=89585
That sounds a very low speed to be in 7th & accelerating uphill, maybe the vibration is just the engine labouring at such low rpm?
Rob
Image

e89 Sdrive 20i, plenty of mumbo & good economy-the thinking bears z4
e89 Sdrive 30i, this ones busted, pass me another...
e85 3.0si sold

Ozie
Member
Member
Posts: 53
Joined: Fri Jul 26, 2013 7:32 am
Location: Espoo, Finland

Rough cold start with 35is

Post by Ozie » Wed Nov 22, 2017 9:50 pm

Z4M-2006 wrote: Wed Nov 22, 2017 7:15 pm Is it bringing EML on ?

Coil packs or vanos actuators would be my next thing..
Nope. No codes or lights.

Ozie
Member
Member
Posts: 53
Joined: Fri Jul 26, 2013 7:32 am
Location: Espoo, Finland

Rough cold start with 35is

Post by Ozie » Wed Nov 22, 2017 9:57 pm

Smartbear wrote: Wed Nov 22, 2017 7:20 pm
Ozie wrote: Wed Nov 22, 2017 6:55 pm HPFP was replaced yesterday. Ignition is now much faster and better. Starts after first crank. No error codes while accelerate. Total cost was about 950 €/ $1120 / £850.

Still noticed vibration when tried to accelerate uphill with 7th gear from 40 mph to 60 mph. More in here viewtopic.php?f=45&t=89585
That sounds a very low speed to be in 7th & accelerating uphill, maybe the vibration is just the engine labouring at such low rpm?
Rob
It's way more rough. You'll get that wtf feeling when it hits. Bit like hitting rev limiter or wheel spin dsc engadged (no dsc lights) by suprise.

Post Reply