Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Resetting service inspection indicator

Specific discussion about the E89 2009 Z4 (sDrive35is, sDrive35i, sDrive30i, sDrive23i)
Post Reply
teuchter2999
Newbie
Newbie
Posts: 2
Joined: Wed Dec 19, 2012 6:38 pm

Resetting service inspection indicator

Post by teuchter2999 » Wed Dec 19, 2012 6:43 pm

Hi There,

Does anyone know how to reset the service inspection indicator on the new Z4? Have googled it, but the only references I can find are for the older model.

Thanks in advance.

User avatar
AlanJ
Lifer
Lifer
Posts: 7725
Joined: Thu Jul 17, 2008 5:54 pm
Location: North Yorks

Re: Resetting service inspection indicator

Post by AlanJ » Wed Dec 19, 2012 7:01 pm

Search on here will find it for you - however done it for you.

Follow this link......

http://www.z4-forum.com/forum/viewtopic ... et#p448305

......and welcome to the Forum. Bit it he Newbie section with some pics of your Zed :thumbsup:
///M tri colour steering wheel, mud flaps and loads of other extras! ZHP illuminated gear lever..... Pre Purchase Checks,Getting the Best out of Dealers http://www.bmwz4roadster.net

teuchter2999
Newbie
Newbie
Posts: 2
Joined: Wed Dec 19, 2012 6:38 pm

Re: Resetting service inspection indicator

Post by teuchter2999 » Wed Dec 19, 2012 7:07 pm

Alan - thanks for your reply, and the welcome :)

Unfortunately - this link looks similar to stuff I found via google... it talks about 'setting the key' to position 0 etc... whereas of course the new Z4 is push-button, so I think the above link is for older vehicles ?

Cheers,
Martin

Post Reply