19" CSL Reps in Gun Metal on 3.0si Z4C

T

trailZ4

Member
Just has 19" CSL reps put on my z4, purchased from BM Autosport.

A few quick phone photos:

20130516_173702_zps327306bb.jpg


20130516_173859_zpsccb4b42e.jpg


20130516_173738_zpsf7ad1a50.jpg


20130516_173717_zps6ac09eef.jpg


20130516_173955_zps0045eba8.jpg


For anyone else interested in sizes / offsets:

Front 8.5J et38 with 235/35/19 Falken 453s
Rear 9.5J et45 with 265/30/19 Falken 453s

I'm really pleased with how they look, but think will consider lowering now!
 
That looks amazing best thing you can do to a car to change the look. :thumbsup:

Just lowerd mine and it transforms the look never done it to a car. I love it I just need to sort the rubbing issue and it will be perfect.
 
£599 for the wheels

http://www.bmautosport.co.uk/showroom/product_info.php/new-spoke-alloys-satin-gunmetal-with-deeper-concave-et45-rearrare-fitment-p-3609?cPath=51_27_134_46
 
Cheers guys.

monkey, what lowering option did you go for? How low and if you don't mind... how much? (pm if you prefer)
 
LOOKS GREAT...

Same exterior/interior combo as mine,but my wheels are hyper silver.....Lowered on Eibachs...



 
Cheers :)

Z4M-2006 was going to ask you in other thread about how you'd lowered yours. Think yours looks great and its much cleaner than mine too :P

Did you get the car lowered if so would you mind dropping me a pm with rough prices for kit and fitment, thanks.
 
Hi Bud,

I fitted the spring kit myself.......

The Eibachs were £200...

I would have used H&R's (cheaper) but they were out of stock,and i had a snapped spring...
 
I went the cheap skate FK route and done it myself (its not a difficult job) the reason I went cheap I had never lowered a car before. I was worried I wouldn't like it to harsh can't get over speed bumps so on. In all honestly I love it there is a bit of bob and its define toy firmer. But the car feels so much nicer when pushing on. My car is a weekend fun project car so not a daily drive.

The FKs are quite extreme at a 40mm drop. And I get rubbing at the back partly as I have m3 wheels. Witch don't really fit a non m zed.

http://s1353.photobucket.com/user/mathewnewport/media/low1_zpsfda6ccd3.jpg.html?sort=3&o=1

Dose look amazing IMO

Sorry can't seem to upload pics from my iPad. I am a computer dim wit!!
 
Crikey you lot are braver than me doing it yourselves, although I guess I've just never even considered giving it a go!

I think Eibachs may be the way I end up going, the gap between wheels and arch you've achieved Z4M-2006 is what I'm after. Your setup does look fantastic monkey especially on those m3 wheels! Tbh I think I'll save up and get someone else to do it though... I struggle to find time just to wash my car these days :|

Cheers Mr wilks, plate was on it when I bought it and its grown on me!
 
Don't blame you on either count. It was easy but I did get very dirty hands ( and I had gloves ) and some spanner rash. Don't rush into it just enjoy the best mod you can ever do to a car :thumbsup: It looks amazing great colour combo.
 
Z4M-2006 said:
LOOKS GREAT...

Same exterior/interior combo as mine,but my wheels are hyper silver.....Lowered on Eibachs...

Click to expand...

strange, mine has the same wheel / spring combo and looks lower than yours at the front, wonder if the springs settle after a while..

looks very good btw, both.. :thumbsup:
 


DSC01041.jpg
[/quote]

not uneven ground, it just seems lower at the front...well unless your pic is on uneven ground i guess...hadn't thought of that...i'm still battling spreadsheets.. :?
 
You must log in or register to reply here.
Back
Top Bottom