Post your Zed picture of the day...

johnz3 · Post by **johnz3** » Sun Feb 05, 2017 7:25 am

Smartbear wrote: for

Morming Smartbear. Where in Essex is that please. Seems familiar but cannot place it. Thanks John

Smartbear · Post by **Smartbear** » Sun Feb 05, 2017 10:33 am

johnz3 wrote:
Smartbear wrote: for
Morming Smartbear. Where in Essex is that please. Seems familiar but cannot place it. Thanks John

Hi John, that's Kersey in Suffolk just down the road from Hadleigh

Rob

johnz3 · Post by **johnz3** » Sun Feb 05, 2017 1:49 pm

Thanks Rob. Live not too far from you in Pitsea. Nice car by the way. Currently looking at a very nice aapproved BMW 23i z4 at Fairfield Southend. White with red interior. Will be a bit underpowered I think as have had both 2.8 z3 and until recently a 3.0i z3.

philip27 · Post by **philip27** » Sun Feb 05, 2017 3:20 pm

Quick picture of mine after its weekly wash and a quick detail finished off with some topaz polish.

Marius · Post by **Marius** » Sun Feb 05, 2017 4:14 pm

Clipboard011 by Marius A., on Flickr

Smartbear · Post by **Smartbear** » Sun Feb 05, 2017 4:37 pm

Marius wrote:

Clipboard011 by Marius A., on Flickr

It could be your ccv causing that amount of oil burning Marius

Rob

Smartbear · Post by **Smartbear** » Sun Feb 05, 2017 4:42 pm

Basking shark

Rob

samZ4M · Post by **samZ4M** » Sun Feb 05, 2017 6:46 pm

Cleaned it this afternoon, along side the new motor, which was covered in dirty from my 1st track day yesterday. This is going to be addictive!

: IMG_3144.JPG (102.31 KiB) Viewed 1118 times

samj89 · Post by **samj89** » Sun Feb 05, 2017 10:58 pm

Lovely day here today! So my first ever clay mitt jobby, want too polish too but didn't have time. Got the metal polish wool comb and cordless drill on the exhausts though

cleaned then back in the garage she went haha

Nanu · Post by **Nanu** » Mon Feb 06, 2017 9:32 pm

DinosaurEyes wrote:Been clearing up the garage at the new house for the last couple of weeks. Squeezed in nice and cosy!

IMG_20170204_105010.jpg

Just need some carpet on them there walls to protect the doors and it's spot on. Impressive reversing into the space available

Nanu · Post by **Nanu** » Mon Feb 06, 2017 9:33 pm

philip27 wrote:Quick picture of mine after its weekly wash and a quick detail finished off with some topaz polish.

Impressive shine. Mine will have to wait till a little warmer on the hands

Smartbear · Post by **Smartbear** » Thu Feb 09, 2017 4:52 am

Night owl

Rob

Marlon · Post by **Marlon** » Thu Feb 09, 2017 10:52 am

philip27 wrote:Quick picture of mine after its weekly wash and a quick detail finished off with some topaz polish.

Wow - that's a great shine

Can't wait to try out my Topaz once the weather improves - hope I can get that same glossy wet look

What colour Red is that?

mr wilks · Post by **mr wilks** » Thu Feb 09, 2017 8:10 pm

Marlon wrote:
philip27 wrote:Quick picture of mine after its weekly wash and a quick detail finished off with some topaz polish.

Wow - that's a great shine
Can't wait to try out my Topaz once the weather improves - hope I can get that same glossy wet look
What colour Red is that?

It is superslick that Colin

Melbourne red i think ?

TomK · Post by **TomK** » Thu Feb 09, 2017 10:53 pm

samj89 wrote:Lovely day here today! So my first ever clay mitt jobby, want too polish too but didn't have time. Got the metal polish wool comb and cordless drill on the exhausts though cleaned then back in the garage she went haha

Never seen the 1M wheels on one of these. Offsets look pretty sweet, I imagine there's no spacers used?
Do you have a photo side on?
Looks good, nice variation on the CSL theme.

Z4-forum.com

Z4-forum.com