SOLD - Z4 Coupe 3.0Si Back Box

idej_z4 · Post by **idej_z4** » Sat Jan 07, 2017 5:29 pm

Not sure if this will even be of any interest to anyone but thought I would give it a try...

The back box from my Z4 Coupe 3.0Si is for sale.

The tips are in pretty good condition. I gave them a quick scrub, but if someone was to spend a bit of time with them I'm sure they could get them a lot better. The back box has been on my car which has only done 30k miles (if that makes any difference).

Price revised due to feedback below - £70 ono

Collection from West Yorkshire...or possible delivery to Yorks / Lancs if needed.

: IMG_2919.JPG (39.64 KiB) Viewed 821 times

: IMG_2920.JPG (38.22 KiB) Viewed 821 times

: IMG_2921.JPG (46.87 KiB) Viewed 821 times

: IMG_2922.JPG (39.04 KiB) Viewed 821 times

mr wilks · Post by **mr wilks** » Sat Jan 07, 2017 5:33 pm

Id say a great price with the tips included

Ducklakeview · Post by **Ducklakeview** » Sat Jan 07, 2017 5:37 pm

Personally I'd say that's double what they go for. Can get a full original system for £99, check Ebay. Keeping an eye on used Z4 exhausts is a bit of a thing with me at the mo

Might also be worth a photo showing where it's actually been cut from the car.

It's also on Ebay for £20 less, meaning it's actually £28 more expensive on here once fees are taken into account... http://www.ebay.co.uk/itm/BMW-Z4-3-0si- ... SwA3dYamoS

Mike

idej_z4 · Post by **idej_z4** » Sat Jan 07, 2017 5:43 pm

Ducklakeview wrote:Personally I'd say that's double what they go for. Can get a full original system for £99, check Ebay. Keeping an eye on used Z4 exhausts is a bit of a thing with me at the mo

Might also be worth a photo showing where it's actually been cut from the car.

It's also on Ebay for £20 less... http://www.ebay.co.uk/itm/BMW-Z4-3-0si- ... SwA3dYamoS

Mike

Thanks for the heads up! I'll revise and add additional photo.

idej_z4 · Post by **idej_z4** » Sat Jan 07, 2017 5:48 pm

Can't seem to add additional photo to original post so here is image showing where it has been cut:

: IMG_2934.JPG (47.51 KiB) Viewed 799 times

Ducklakeview · Post by **Ducklakeview** » Sat Jan 07, 2017 5:53 pm

Looking at where that's been cut, right on the bend - it'll be awkward to refit unless it's welded, there isn't enough room in that area to fit flanges, and sleeves won't fit on a curved section. Just a heads up..

Mike

idej_z4 · Post by **idej_z4** » Sat Jan 07, 2017 5:54 pm

Ducklakeview wrote:Looking at where that's been cut, right on the bend - it'll be awkward to refit unless it's welded, there isn't enough room in that area to fit flanges, and sleeves won't fit on a curved section. Just a heads up..

Mike

Thanks.

I'll leave it up for a few days and see if anyone makes me an offer, if not I'll just scrap it!

Ducklakeview · Post by **Ducklakeview** » Sat Jan 07, 2017 5:55 pm

idej_jedi wrote:
Ducklakeview wrote:Looking at where that's been cut, right on the bend - it'll be awkward to refit unless it's welded, there isn't enough room in that area to fit flanges, and sleeves won't fit on a curved section. Just a heads up..

Mike
Thanks. I'll leave it up for a few days and see if anyone makes me an offer, if not I'll just scrap it!

I wouldn't scrap it, it's still of use, but just a bit more involved than a simple swap..

Mike

Post by **srhutch** » Sat Jan 07, 2017 8:47 pm

If you do scrap, take the tips off. They just pull off with a twist to help. They are not cheap, so cleaning them up and selling on could nett a few quid.

Ducklakeview · Post by **Ducklakeview** » Sat Jan 07, 2017 9:03 pm

I would be interested in the box sans tips, as I can lengthen the pipes.

Mike

idej_z4 · Post by **idej_z4** » Sat Jan 07, 2017 10:39 pm

srhutch wrote:If you do scrap, take the tips off. They just pull off with a twist to help. They are not cheap, so cleaning them up and selling on could nett a few quid.

Thanks buddy!

idej_z4 · Post by **idej_z4** » Sat Jan 07, 2017 10:41 pm

Ducklakeview wrote:I would be interested in the box sans tips, as I can lengthen the pipes.

Mike

If you're interested then happy for you to make me an offer

Ducklakeview · Post by **Ducklakeview** » Sat Jan 07, 2017 10:44 pm

idej_jedi wrote:
Ducklakeview wrote:I would be interested in the box sans tips, as I can lengthen the pipes.

Mike
If you're interested then happy for you to make me an offer

£50 delivered, without the tips (delivery is about £10)?

Mike

idej_z4 · Post by **idej_z4** » Sun Jan 08, 2017 3:15 pm

Ducklakeview wrote:
idej_jedi wrote:
Ducklakeview wrote:I would be interested in the box sans tips, as I can lengthen the pipes.

Mike
If you're interested then happy for you to make me an offer
£50 delivered, without the tips (delivery is about £10)?

Mike

PM'd.

Ducklakeview · Post by **Ducklakeview** » Wed Jan 18, 2017 1:55 pm

Box delivered in person 10 mins ago - TYVM..

Mike

Z4-forum.com

Z4-forum.com