Decent 107's with rubber... SOLD

[Ducklakeview]

Ok,

So now I have done the deal on a set of 224's, and plan on picking them up in the next couple of days (thanks Mr W) it means I have these bad boys to go..

Will up some pics when I get them off and cleaned (tomorrow prob)

They are standard staggered sizes, and come with Bridgestone RE050 runflat's on them Fronts are approx 5.5-6mm exenly worn, and rears approx 3mm, again evenly worn. Will take exact measurements when I get them off the car.

No blistering or bubbling paint or corrosion, couple of minor kerb marks, to I think 2 of them, but will confirm with pics. Straight with no buckles/cracks and all recently balanced less than 1000 miles ago.

Looking for £300 on them, open to SENSIBLE offers..

PICS TO FOLLOW....

Mike

[Mekon]

I could be interested I am picking up a set of e46 18" M3 wheels at the weekend if they don't fit I will be looking elsewhere and selling them

[Ducklakeview]

I could be interested I am picking up a set of e46 18" M3 wheels at the weekend if they don't fit I will be looking elsewhere and selling them

I'm sure I've read on here somewhere that the E46 M3 rears don't fit without machining? I think it was Machine monkey that did his. I believe you can fit 4 x M3 FRONT wheels as a straight bolt on though.

Mike

[RyanB88]

I could be interested I am picking up a set of e46 18" M3 wheels at the weekend if they don't fit I will be looking elsewhere and selling them

I'm sure I've read on here somewhere that the E46 M3 rears don't fit without machining? I think it was Machine monkey that did his. I believe you can fit 4 x M3 FRONT wheels as a straight bolt on though.

Mike

Not 100% sure but this may be in regards to the m3 19"s rather than the 18"s..... I believe the 18s may just squeeze in the arches

[Ducklakeview]

I could be interested I am picking up a set of e46 18" M3 wheels at the weekend if they don't fit I will be looking elsewhere and selling them

I'm sure I've read on here somewhere that the E46 M3 rears don't fit without machining? I think it was Machine monkey that did his. I believe you can fit 4 x M3 FRONT wheels as a straight bolt on though.

Mike

Not 100% sure but this may be in regards to the m3 19"s rather than the 18"s..... I believe the 18s may just squeeze in the arches

I thought the rear offset was the issue, hence going for 4 x front wheels?

Mike

[Ducklakeview]

Now sold. For info, they went on Ebay for £335

Mike