From what I understand pin 4 is already populated so the wire needs to be spliced. Guessing this is what the piggy back wire is for included with the loom :dunno:Scooba_Steve wrote: ↑Fri May 05, 2017 10:41 pm As I said many moons ago, fit it and worst case it needs coding, still save plenty on labour and better than the parts sitting in the box Can't see why it would need coding though but may well be wrong.
I'd be interested to know if the connection between X6021 and X60002 exists, if pin 4 at X60002 is occupied then it must but will need removing as I can't see the X6021 connection being made with the retro loom.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Fitting Cruise to the M - links?
- srhutch
- Moderator
- Posts: 26959
- Joined: Tue Jun 19, 2007 1:22 pm
- Location: East Sussex, UK
- Contact:
Fitting Cruise to the M - links?
-
- Lifer
- Posts: 5277
- Joined: Wed Feb 19, 2014 3:01 pm
- Location: NW London
Fitting Cruise to the M - links?
In that case should just be able to remove it according to the diagram as it doesn't go anywhere. You can't connect on the 'other side' at X6021 because you'd need a male pin.
The black 'repair' cable is just a different sized pin connector, which I think only the N52 (maybe N46?) needs. Easy to compare.
The black 'repair' cable is just a different sized pin connector, which I think only the N52 (maybe N46?) needs. Easy to compare.
- Attachments
-
- E85 E86 S54 X6021.PNG (45.56 KiB) Viewed 773 times
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.
-
- Lifer
- Posts: 5277
- Joined: Wed Feb 19, 2014 3:01 pm
- Location: NW London
Fitting Cruise to the M - links?
You should be able to test both of those pin 4s for continuity to confirm they're not connected to anything else.
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.
- Vanne
- Senior Member
- Posts: 1579
- Joined: Sun Jul 07, 2013 12:55 pm
- Location: Dubai
- Contact:
Fitting Cruise to the M - links?
I just removed my cruize and other moduels on the colom, are the plugs there to just plug it it if you buy the stalk?
2007 EuroSpec Z4///MC Building/Developing Z4 GT3
Powered by Severn Tuning
Powered by Severn Tuning
- srhutch
- Moderator
- Posts: 26959
- Joined: Tue Jun 19, 2007 1:22 pm
- Location: East Sussex, UK
- Contact:
Fitting Cruise to the M - links?
Right, wiring cracked
Will post up some details later, going to start plumbing in now.
Will post up some details later, going to start plumbing in now.
-
- Lifer
- Posts: 5277
- Joined: Wed Feb 19, 2014 3:01 pm
- Location: NW London
Fitting Cruise to the M - links?
Nothing connected then? Pics would be great
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.
- srhutch
- Moderator
- Posts: 26959
- Joined: Tue Jun 19, 2007 1:22 pm
- Location: East Sussex, UK
- Contact:
Fitting Cruise to the M - links?
Right, it's all fitted but not tested. Car seems ok when putting away, no error lights and the throttle still works
I'm out with the South East Hooooners in the morning do will test and report back.
I have lots of pictures.
I'm out with the South East Hooooners in the morning do will test and report back.
I have lots of pictures.
- Beedub
- Lifer
- Posts: 11003
- Joined: Wed Sep 10, 2008 2:25 pm
- Location: Sutton Coldfield
Fitting Cruise to the M - links?
woooooooiiiiii!!!!!
pics pics pics pics!!!!
pics pics pics pics!!!!
www.topwrapz.com - Multi Award Winning - Detailing | Vinyl Wrap | Paint Protection Film Specialists |
-
- Lifer
- Posts: 5597
- Joined: Wed May 02, 2012 5:48 pm
- Location: Newcastle upon Tyne
Fitting Cruise to the M - links?
Brilliant - hope all's well. Have a great run - awaiting with interest
Now Porsche flat 6 experience, 986S & 981S.
2006 Z4MR Imola Red/Imola Red, 2008 3.0si Sport Stratus Grey/Piano black, 2006 2.0I Sport Silver Grey Facelift. MX5, TVR Chimaera, many motorbikes.
2006 Z4MR Imola Red/Imola Red, 2008 3.0si Sport Stratus Grey/Piano black, 2006 2.0I Sport Silver Grey Facelift. MX5, TVR Chimaera, many motorbikes.
-
- Lifer
- Posts: 5277
- Joined: Wed Feb 19, 2014 3:01 pm
- Location: NW London
Fitting Cruise to the M - links?
Good lad! Don't forget, only works above 30 kmh (20 mph ish).
I somehow managed to blow a fuse when fitting mine and had brake lights on solidly, so worth checking lights while running before setting off.
I somehow managed to blow a fuse when fitting mine and had brake lights on solidly, so worth checking lights while running before setting off.
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.
- srhutch
- Moderator
- Posts: 26959
- Joined: Tue Jun 19, 2007 1:22 pm
- Location: East Sussex, UK
- Contact:
Fitting Cruise to the M - links?
Had battery disconnected whilst fitting and checked most lights afterwards, but will check the brakes before setting off.
- Beedub
- Lifer
- Posts: 11003
- Joined: Wed Sep 10, 2008 2:25 pm
- Location: Sutton Coldfield
Fitting Cruise to the M - links?
is it working!!!!!!!!!
www.topwrapz.com - Multi Award Winning - Detailing | Vinyl Wrap | Paint Protection Film Specialists |
-
- Lifer
- Posts: 5277
- Joined: Wed Feb 19, 2014 3:01 pm
- Location: NW London
Fitting Cruise to the M - links?
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.
-
- Lifer
- Posts: 11057
- Joined: Tue Feb 10, 2015 10:27 pm
Fitting Cruise to the M - links?
You won't be able to buy an M without it now....
M roady...OEM CSL’s, strut brace, Remus back boxes, ZHP
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
-
- Lifer
- Posts: 5277
- Joined: Wed Feb 19, 2014 3:01 pm
- Location: NW London
Fitting Cruise to the M - links?
That's no bad thing!
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.