Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Fitting Cruise to the M - links?

"M" Specific discussion
User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Fitting Cruise to the M - links?

Post by srhutch » Fri May 05, 2017 11:49 pm

Scooba_Steve wrote: Fri May 05, 2017 10:41 pm As I said many moons ago, fit it and worst case it needs coding, still save plenty on labour and better than the parts sitting in the box :lol: Can't see why it would need coding though but may well be wrong.

I'd be interested to know if the connection between X6021 and X60002 exists, if pin 4 at X60002 is occupied then it must but will need removing as I can't see the X6021 connection being made with the retro loom.
From what I understand pin 4 is already populated so the wire needs to be spliced. Guessing this is what the piggy back wire is for included with the loom :dunno:
Image

Scooba_Steve
Lifer
Lifer
Posts: 5277
Joined: Wed Feb 19, 2014 3:01 pm
Location: NW London

Fitting Cruise to the M - links?

Post by Scooba_Steve » Sat May 06, 2017 12:23 am

In that case should just be able to remove it according to the diagram as it doesn't go anywhere. You can't connect on the 'other side' at X6021 because you'd need a male pin.

The black 'repair' cable is just a different sized pin connector, which I think only the N52 (maybe N46?) needs. Easy to compare.
Attachments
E85 E86 S54 X6021.PNG
E85 E86 S54 X6021.PNG (45.56 KiB) Viewed 769 times
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.

Scooba_Steve
Lifer
Lifer
Posts: 5277
Joined: Wed Feb 19, 2014 3:01 pm
Location: NW London

Fitting Cruise to the M - links?

Post by Scooba_Steve » Sat May 06, 2017 12:25 am

You should be able to test both of those pin 4s for continuity to confirm they're not connected to anything else.
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.

User avatar
Vanne
Senior Member
Senior Member
Posts: 1576
Joined: Sun Jul 07, 2013 12:55 pm
Location: Dubai
Contact:

Fitting Cruise to the M - links?

Post by Vanne » Sat May 06, 2017 3:25 pm

I just removed my cruize and other moduels on the colom, are the plugs there to just plug it it if you buy the stalk?
2007 EuroSpec Z4///MC Building/Developing Z4 GT3
Powered by Severn Tuning

Image

User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Fitting Cruise to the M - links?

Post by srhutch » Sat May 06, 2017 4:23 pm

Right, wiring cracked :thumbsup:

Will post up some details later, going to start plumbing in now. :D
Image

Scooba_Steve
Lifer
Lifer
Posts: 5277
Joined: Wed Feb 19, 2014 3:01 pm
Location: NW London

Fitting Cruise to the M - links?

Post by Scooba_Steve » Sat May 06, 2017 4:45 pm

Nothing connected then? Pics would be great :)
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.

User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Fitting Cruise to the M - links?

Post by srhutch » Sat May 06, 2017 6:31 pm

Right, it's all fitted but not tested. Car seems ok when putting away, no error lights and the throttle still works :lol:

I'm out with the South East Hooooners in the morning do will test and report back.

I have lots of pictures.
Image

User avatar
Beedub
Lifer
Lifer
Posts: 10973
Joined: Wed Sep 10, 2008 2:25 pm
Location: Sutton Coldfield

Fitting Cruise to the M - links?

Post by Beedub » Sat May 06, 2017 9:20 pm

woooooooiiiiii!!!!!


pics pics pics pics!!!!
www.topwrapz.com - Multi Award Winning - Detailing | Vinyl Wrap | Paint Protection Film Specialists |

paulgs1000
Lifer
Lifer
Posts: 5597
Joined: Wed May 02, 2012 5:48 pm
Location: Newcastle upon Tyne

Fitting Cruise to the M - links?

Post by paulgs1000 » Sat May 06, 2017 9:24 pm

srhutch wrote: Sat May 06, 2017 4:23 pm Right, wiring cracked :thumbsup:

Will post up some details later, going to start plumbing in now. :D
Brilliant - hope all's well. Have a great run - awaiting with interest :thumbsup:
Now Porsche flat 6 experience, 986S & 981S.
2006 Z4MR Imola Red/Imola Red, 2008 3.0si Sport Stratus Grey/Piano black, 2006 2.0I Sport Silver Grey Facelift. MX5, TVR Chimaera, many motorbikes.

Scooba_Steve
Lifer
Lifer
Posts: 5277
Joined: Wed Feb 19, 2014 3:01 pm
Location: NW London

Fitting Cruise to the M - links?

Post by Scooba_Steve » Sat May 06, 2017 9:51 pm

Good lad! Don't forget, only works above 30 kmh (20 mph ish).

I somehow managed to blow a fuse when fitting mine and had brake lights on solidly, so worth checking lights while running before setting off.
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.

User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Fitting Cruise to the M - links?

Post by srhutch » Sat May 06, 2017 10:22 pm

Had battery disconnected whilst fitting and checked most lights afterwards, but will check the brakes before setting off. :thumbsup:
Image

User avatar
Beedub
Lifer
Lifer
Posts: 10973
Joined: Wed Sep 10, 2008 2:25 pm
Location: Sutton Coldfield

Fitting Cruise to the M - links?

Post by Beedub » Sun May 07, 2017 10:23 am

is it working!!!!!!!!!
www.topwrapz.com - Multi Award Winning - Detailing | Vinyl Wrap | Paint Protection Film Specialists |

Scooba_Steve
Lifer
Lifer
Posts: 5277
Joined: Wed Feb 19, 2014 3:01 pm
Location: NW London

Fitting Cruise to the M - links?

Post by Scooba_Steve » Sun May 07, 2017 10:35 am

:trampoline:
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.

john-e89
Lifer
Lifer
Posts: 11026
Joined: Tue Feb 10, 2015 10:27 pm

Fitting Cruise to the M - links?

Post by john-e89 » Sun May 07, 2017 10:51 am

You won't be able to buy an M without it now.... :lol:
M roady...OEM CSL’s, strut brace, Remus back boxes, ZHP
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29

Scooba_Steve
Lifer
Lifer
Posts: 5277
Joined: Wed Feb 19, 2014 3:01 pm
Location: NW London

Fitting Cruise to the M - links?

Post by Scooba_Steve » Sun May 07, 2017 11:41 am

That's no bad thing!
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.

Post Reply