Is there a special trick or do they just pop off?
I don't want to bend them, any advice is welcome.
Cheers,
René
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
How to remove the ///M door sill protector?
- Rene_Z4MC
- Member
- Posts: 151
- Joined: Sun Jun 02, 2013 3:50 pm
How to remove the ///M door sill protector?
2006 Z4M Coupe Interlagos Blue, CS Wheels with Michelin PSS, Eibach, CDV delete, RTAB limiters, Vibra Technics Engine Mounts, OEM Strutbrace, ZHP gear knob
- LukeM
- Newbie
- Posts: 32
- Joined: Sun May 04, 2014 1:04 am
- Location: Cheshire
How to remove the ///M door sill protector?
Silver Grey Z4M Coupe
- Rene_Z4MC
- Member
- Posts: 151
- Joined: Sun Jun 02, 2013 3:50 pm
How to remove the ///M door sill protector?
That should do it, big thanks!LukeM wrote: ↑Tue May 09, 2017 12:19 pm There's a decent guide here with pics
http://www.pelicanparts.com/techarticle ... cement.htm
2006 Z4M Coupe Interlagos Blue, CS Wheels with Michelin PSS, Eibach, CDV delete, RTAB limiters, Vibra Technics Engine Mounts, OEM Strutbrace, ZHP gear knob
How to remove the ///M door sill protector?
Not looked at link
But as taken mine off loads due to replacing and when at detailers or garages ( prevent scratching)
I simply get a finger along back edge and gently lift up as 4 poppers hold them in place
So may need new as tend to be brittle
But as taken mine off loads due to replacing and when at detailers or garages ( prevent scratching)
I simply get a finger along back edge and gently lift up as 4 poppers hold them in place
So may need new as tend to be brittle