Anyone running 19x9j front wheels?

bmwaddict · Post by **bmwaddict** » Wed May 24, 2017 8:57 am

As above, anyone running 9j fronts? I have 8.5s on the front at the moment, my car is lowered but I'm putting it back on oem springs.

jamie_z4 · Post by **jamie_z4** » Wed May 24, 2017 9:04 am

bmwaddict wrote: ↑Wed May 24, 2017 8:57 am As above, anyone running 9j fronts? I have 8.5s on the front at the moment, my car is lowered but I'm putting it back on oem springs.

its all offset dependant mate. I ran the X5's on mine for a day which were 9J but et35 but with 215/35/19 tyres which are probably way beyond what youd want on an M car. Which wheels are you looking at?

bmwaddict · Post by **bmwaddict** » Wed May 24, 2017 9:16 am

Cheers for the reply Jamie. Looking at Avantgarde M359s, fronts are same as those X5 wheels, 9x19 ET 35.

: mini-avant-garde-M359-wheels-matte-black-4.jpg (29.97 KiB) Viewed 1175 times

mr wilks · Post by **mr wilks** » Wed May 24, 2017 9:41 am

Slightly different game with Jamie on non M E85 fitment
Isn't Beedub on 9j fronts although 18s ?
You could throw a rear 224 on front to get a idea of how it will stand in arch ?

jamie_z4 · Post by **jamie_z4** » Wed May 24, 2017 9:47 am

bmwaddict wrote: ↑Wed May 24, 2017 9:16 am Cheers for the reply Jamie. Looking at Avantgarde M359s, fronts are same as those X5 wheels, 9x19 ET 35.
mini-avant-garde-M359-wheels-matte-black-4.jpg

I'm not too well up on M fitment mate, but i think on OEM ride height you should be OK? They only tend to be issues on lowered cars. The OEM ride height gives you the clearance you need, however with the standard ride height they may look a bit 'sticky outy' due to the lack of camber associated with std rideheight.... think youd be safer with the Atomics like i have - Chris @ CM Wheels will do you a set in M3/Z4m fitment

bmwaddict · Post by **bmwaddict** » Wed May 24, 2017 10:02 am

mr wilks wrote: ↑Wed May 24, 2017 9:41 am Slightly different game with Jamie on non M E85 fitment
Isn't Beedub on 9j fronts although 18s ?
You could throw a rear 224 on front to get a idea of how it will stand in arch ?

That would work if I had a set of 224s! Cheers for the idea though.

Jamie, I'm actually talking to someone about a set of csl reps in m offsets at the moment, will have to wait til I sell one of my 3 sets of wheels though!

jamie_z4 · Post by **jamie_z4** » Wed May 24, 2017 10:06 am

i would love those Linea Corse wheels off you! Mine are Nearly M3 offsets! et33 rears - 38 fronts

bmwaddict · Post by **bmwaddict** » Wed May 24, 2017 10:30 am

jamie_z4 wrote: ↑Wed May 24, 2017 10:06 am i would love those Linea Corse wheels off you! Mine are Nearly M3 offsets! et33 rears - 38 fronts

They are for sale mate, 10in rears though! I just need another set to get on the car first.

jamie_z4 · Post by **jamie_z4** » Wed May 24, 2017 10:43 am

i know mate thats the only problem

Think that id struggle with 10s on the back of mine

bmwaddict · Post by **bmwaddict** » Wed May 24, 2017 10:49 am

I'm guessing you're already running a 9.5 rear, how much space do you have left? The rears are et38 10j, currently on 275 30 19 tyres with a slight stretch, nothing too extreme.

jamie_z4 · Post by **jamie_z4** » Wed May 24, 2017 10:58 am

Im on a 235 35 rear on a 9.5j.... that is extreme

I think anything miore would rub

Have you got a forsale thread? Very desirable wheels suprised they havent been snapped up

99ron · Post by **99ron** » Wed May 24, 2017 11:00 am

I have Avantgarde M359s on mine. 9J front 10J rear. Rears also have a spacer, not sure 5 or 8 mm maybe. I'm on H&R springs. No issues.
235/35 fronts 265/30 rear PSS. Previous owner fitted them. The only thing I've noticed with these wheels is the paint seems to have chipped easily in quite a few places.

Fishy Dave · Post by **Fishy Dave** » Wed May 24, 2017 11:05 am

mr wilks wrote: ↑Wed May 24, 2017 9:41 am You could throw a rear 224 on front to get a idea of how it will stand in arch ?

I've tried that, it almost works but sticks out that bit too far. Well, you could probably just get away with it if running 5 degrees negative camber and don't want to use full steering lock!

bmwaddict · Post by **bmwaddict** » Wed May 24, 2017 11:09 am

jamie_z4 wrote: ↑Wed May 24, 2017 10:58 am Im on a 235 35 rear on a 9.5j.... that is extreme I think anything miore would rub

Have you got a forsale thread? Very desirable wheels suprised they havent been snapped up

Yes mate, put them up a few weeks ago, no replies though.

99ron wrote: ↑Wed May 24, 2017 11:00 am I have Avantgarde M359s on mine. 9J front 10J rear. Rears also have a spacer, not sure 5 or 8 mm maybe. I'm on H&R springs. No issues.
235/35 fronts 265/30 rear PSS. Previous owner fitted them. The only thing I've noticed with these wheels is the paint seems to have chipped easily in quite a few places.

Thanks for that Ron, do you know the offsets of your wheels?

bmwaddict · Post by **bmwaddict** » Wed May 24, 2017 11:11 am

Fishy Dave wrote: ↑Wed May 24, 2017 11:05 am
mr wilks wrote: ↑Wed May 24, 2017 9:41 am You could throw a rear 224 on front to get a idea of how it will stand in arch ?
I've tried that, it almost works but sticks out that bit too far. Well, you could probably just get away with it if running 5 degrees negative camber and don't want to use full steering lock!

I don't fancy that Dave! I plan to use my Z4M as intended, and maybe even the odd track day in the future, so I want maximum usability.

Z4-forum.com

Z4-forum.com