Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Inspection 1

"M" Specific discussion
User avatar
Beemingallover
Member
Member
Posts: 165
Joined: Tue Jul 29, 2014 9:47 am

Inspection 1

Post by Beemingallover » Sat Jul 15, 2017 4:50 pm

My 2006 Z4MR is due an inspection1 (69k mls), the local BMW dealer has quoted £231, seems a bit cheap, too cheap! Although not as major as inspec 2, it's still a major service. Worried about getting a decent job done. I recently had the brakes discs/pads replaced so those are excluded.
:driving: Z4MR 2006 Interlargos Blue/Sepang Bronze SUMMER
E92 M3 coupe manual 2009 Silverstone Blue WINTER
M635Csi 1986 manual Lachs silver. GONE.

mmm-five
Lifer
Lifer
Posts: 12714
Joined: Sun Nov 30, 2008 1:03 pm
Location: Liverpool
Contact:

Inspection 1

Post by mmm-five » Sat Jul 15, 2017 5:52 pm

They're obviously never going to do the clearances for that price...so get them to confirm, in writing, what WILL be done for that price.

Then when you pick it up afterwards and ask for the valve clearance report, and they tell you that you haven't paid for it, then you can show them their written quote.

Another way to check is to ask how long the inspection will take. If it's an hour then it's basically an extended oil service. 4 hours an it should be a proper Inspection.
Trigger’s Z4MC
Some bits now over 163,000 miles, some less than 1,000 miles.
Individual Ruby Black, Individual extended champagne leather, plus many options

Image

User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Inspection 1

Post by srhutch » Sat Jul 15, 2017 5:52 pm

That's way two cheap. Main dealer oil service for an ///M under is value plan is £199

Inspection one includes valve clearances, among other things. £500 is probably nearer and that's probably Indy price.
Image

Online
User avatar
buzyg
Legend
Legend
Posts: 26421
Joined: Fri May 20, 2011 6:11 pm
Location: Cornwall

Inspection 1

Post by buzyg » Sat Jul 15, 2017 10:43 pm

Seems too cheap to me to. I paid over £800 last time at a main dealer. As said check that they are doing the valve clearance check and ask for the figures.
Image

User avatar
Beemingallover
Member
Member
Posts: 165
Joined: Tue Jul 29, 2014 9:47 am

Inspection 1

Post by Beemingallover » Tue Jul 18, 2017 9:58 am

Been back to the dealer and had to almost insist that the Inspection 1 was more to it than an oil change, after some kerfuffle some bod came on the line and said that I was right, valve clearances would be checked and that would be £619 please sir! Knew I was wasting my time saying that the quote was originally £231, apparently the guy I had originally booked with was new and unaware of Z4M specialities! Not good, they need to be trained up straight off.
:driving: Z4MR 2006 Interlargos Blue/Sepang Bronze SUMMER
E92 M3 coupe manual 2009 Silverstone Blue WINTER
M635Csi 1986 manual Lachs silver. GONE.

D4dawg

Inspection 1

Post by D4dawg » Wed Jul 19, 2017 12:25 am

Then you go back and ask then to do works upon first quote buddy
Their issue not Yours

I feel inspection 1 is a waste of money
It's oil and filter £199 at mo
And pollen filter £55 +vat
The rest is checks !
Sorry at £619+ at bmw I'm not paying £300 for someone to visually check my car
As I know it's mint so they could do anyone's id say in max 30 mins

So I've got them to price valves check and adjust £500
Oil And filter £199 and they will do the checks anyway so
To me it's an inspection 2 for £700 at main dealer not £1300!
As I've don't diff and box with new plugs myself and full Hunter

So all good there and insp2 when bought car on 10k, 3 years ago then oil and filter every 3k

mmm-five
Lifer
Lifer
Posts: 12714
Joined: Sun Nov 30, 2008 1:03 pm
Location: Liverpool
Contact:

Inspection 1

Post by mmm-five » Wed Jul 19, 2017 10:06 am

What about the labour cost for a couple of hours for the valve clearances...yes you could call it just a 'check', but one most of us would consider necessary.

My local dealer in Liverpool would charge over £120/hour, plus about £5 per shim.
Trigger’s Z4MC
Some bits now over 163,000 miles, some less than 1,000 miles.
Individual Ruby Black, Individual extended champagne leather, plus many options

Image

User avatar
Fishy Dave
Member
Member
Posts: 917
Joined: Sun Jul 05, 2015 8:01 pm
Location: Wiltshire, England
Contact:

Inspection 1

Post by Fishy Dave » Wed Jul 19, 2017 12:52 pm

mmm-five wrote: Wed Jul 19, 2017 10:06 am What about the labour cost for a couple of hours for the valve clearances...yes you could call it just a 'check', but one most of us would consider necessary.

My local dealer in Liverpool would charge over £120/hour, plus about £5 per shim.
Yes, and two hours would be pretty quick for the valve clearances.....or I'm too slow/thorough. :oops:
Corvette C6
Mazda RX-8 race car
Now sold: Z4M Roadster, the best all round car I have owned.

D4dawg

Inspection 1

Post by D4dawg » Wed Jul 19, 2017 2:58 pm

mmm-five wrote: Wed Jul 19, 2017 10:06 am What about the labour cost for a couple of hours for the valve clearances...yes you could call it just a 'check', but one most of us would consider necessary.

My local dealer in Liverpool would charge over £120/hour, plus about £5 per shim.
If in ref to me buddy
Inspection 1 does not do valves
Only inspection 2

Hence £300 worth of checks for an inspection 1

So I'm having valves oil and both filter done plus plugs whilst there for £700 @ main dealer

That to me makes far more sense

User avatar
TomK
Senior Member
Senior Member
Posts: 2363
Joined: Fri Jan 25, 2013 11:50 pm
Location: West London

Inspection 1

Post by TomK » Wed Jul 19, 2017 3:23 pm

D4dawg wrote: Wed Jul 19, 2017 2:58 pm Inspection 1 does not do valves
Only inspection 2
Rubbish
Attachments
z4e46servicemaintchecklist-3.jpg
z4e46servicemaintchecklist-3.jpg (151.5 KiB) Viewed 1548 times
MC[IB], CSL airbox, Schrick 288/280 cams, 4.44FD, UUC SSK, SS race cat back, AP CP9660[F]/5144[R] brakes, Apex ARC-8 with AR-1 or PS5, KW ClubSport 2-way, Turner spherical arms, PMC uniball rtab, VB engine mounts, Rogue pulleys & RSMs, Tillett B6, half cage

JAD

Inspection 1

Post by JAD » Wed Jul 19, 2017 3:32 pm

TomK wrote: Wed Jul 19, 2017 3:23 pm
D4dawg wrote: Wed Jul 19, 2017 2:58 pm Inspection 1 does not do valves
Only inspection 2
Rubbish
And yet, even when it's in black and white, I know very few owners on here that received reports. Yes, I know the point you'll make - "don't ask, don't get". But why should we have to ask a main dealership of the manufacturer/brand we own to include something they have deemed necessary to include in their servicing schedule?! Bonkers.

User avatar
Fishy Dave
Member
Member
Posts: 917
Joined: Sun Jul 05, 2015 8:01 pm
Location: Wiltshire, England
Contact:

Inspection 1

Post by Fishy Dave » Wed Jul 19, 2017 3:33 pm

D4dawg wrote: Wed Jul 19, 2017 2:58 pm Inspection 1 does not do valves
On an M the Inspection 1 and 2 services both check and adjust the valve clearances, hence the high price to pay someone to do it. :)
Corvette C6
Mazda RX-8 race car
Now sold: Z4M Roadster, the best all round car I have owned.

User avatar
Beemingallover
Member
Member
Posts: 165
Joined: Tue Jul 29, 2014 9:47 am

Inspection 1

Post by Beemingallover » Wed Jul 19, 2017 3:36 pm

Dealer now says Inspection 1 does not do valves, check or otherwise!! That's Inspection 2 only.
:driving: Z4MR 2006 Interlargos Blue/Sepang Bronze SUMMER
E92 M3 coupe manual 2009 Silverstone Blue WINTER
M635Csi 1986 manual Lachs silver. GONE.

mmm-five
Lifer
Lifer
Posts: 12714
Joined: Sun Nov 30, 2008 1:03 pm
Location: Liverpool
Contact:

Inspection 1

Post by mmm-five » Wed Jul 19, 2017 3:40 pm

As others have mention an Insp1 should always have a valve clearance check.

The £600-£700 for an Insp1 at a dealer isn't an issue for me - although I now use a specialist - but I don't know how they can justify another £500 to upgrade to an Insp2...when they're only adding another hours labour and £150 of parts.

I now just get an annual Insp2 at my specialist (don't bother with an Insp1 anymore as I have plenty of interim oil changes in the year) for about the same price as a Insp1 at a dealer.
Trigger’s Z4MC
Some bits now over 163,000 miles, some less than 1,000 miles.
Individual Ruby Black, Individual extended champagne leather, plus many options

Image

User avatar
TomK
Senior Member
Senior Member
Posts: 2363
Joined: Fri Jan 25, 2013 11:50 pm
Location: West London

Inspection 1

Post by TomK » Wed Jul 19, 2017 3:41 pm

Beemingallover wrote: Wed Jul 19, 2017 3:36 pm Dealer now says Inspection 1 does not do valves, check or otherwise!! That's Inspection 2 only.
Perhaps you should refer them to the doc above and politely take your business elsewhere.... to an indy who has some idea about the car they are about to work on with your money.
MC[IB], CSL airbox, Schrick 288/280 cams, 4.44FD, UUC SSK, SS race cat back, AP CP9660[F]/5144[R] brakes, Apex ARC-8 with AR-1 or PS5, KW ClubSport 2-way, Turner spherical arms, PMC uniball rtab, VB engine mounts, Rogue pulleys & RSMs, Tillett B6, half cage

Post Reply