Z4-forum.com

I’ve been following this thread and have everything done

viewtopic.php?t=138025

It says to use pin 35 on x14260 footwell module, the being the left one as you look at it under the steering wheel

Mine though already has a pin 35 fitted

Anyone done this and is x14260 socket as said the left one?

https://www.bmwgm5.com/Footwell_Module_Connections.htm

Appreciate the help

It's the right side plug coupler for RHD and the left is shown in diagrams for LHD.
Photo taken from when I did mine

EDIT** In the photo I've twisted it round 180° to show where the new wiring was

AnubisZed wrote: ↑Sun Apr 21, 2024 4:34 pm It's the right side plug coupler for RHD and the left is shown in diagrams for LHD.
Photo taken from when I did mine

EDIT** In the photo I've twisted it round 180° to show where the new wiring was

Thanks Dave did you have to do any programming to get pin 35 working on the right socket, tried it no power ?

birdy_z4 wrote: ↑Sun Apr 21, 2024 5:39 pm

AnubisZed wrote: ↑Sun Apr 21, 2024 4:34 pm It's the right side plug coupler for RHD and the left is shown in diagrams for LHD.
Photo taken from when I did mine

EDIT** In the photo I've twisted it round 180° to show where the new wiring was

Thanks Dave did you have to do any programming to get pin 35 working on the right socket, tried it no power ?

I honestly can't remember whether I checked it before I coded it, but the VO code for it is 563, which will need coding to the CAS and NFRM

AnubisZed wrote: ↑Mon Apr 22, 2024 1:04 pm

birdy_z4 wrote: ↑Sun Apr 21, 2024 5:39 pm

AnubisZed wrote: ↑Sun Apr 21, 2024 4:34 pm It's the right side plug coupler for RHD and the left is shown in diagrams for LHD.
Photo taken from when I did mine

EDIT** In the photo I've twisted it round 180° to show where the new wiring was

Thanks Dave did you have to do any programming to get pin 35 working on the right socket, tried it no power ?

I honestly can't remember whether I checked it before I coded it, but the VO code for it is 563, which will need coding to the CAS and NFRM

Thanks Dave I will give it a go if it ever stops raining

birdy_z4 wrote: ↑Mon Apr 22, 2024 2:04 pm

AnubisZed wrote: ↑Mon Apr 22, 2024 1:04 pm

birdy_z4 wrote: ↑Sun Apr 21, 2024 5:39 pm Thanks Dave did you have to do any programming to get pin 35 working on the right socket, tried it no power ?

I honestly can't remember whether I checked it before I coded it, but the VO code for it is 563, which will need coding to the CAS and NFRM

Thanks Dave I will give it a go if it ever stops raining

Worked a treat now have power just need to refit the inside back

Have you done the door handles ?

B21 wrote: ↑Tue Apr 23, 2024 8:57 pm Have you done the door handles ?

Only the internal for now

birdy_z4 wrote: ↑Wed Apr 24, 2024 1:03 pm

B21 wrote: ↑Tue Apr 23, 2024 8:57 pm Have you done the door handles ?

Only the internal for now

Bit more of a big ticket item…but..given your journey..do-able

B21 wrote: ↑Wed Apr 24, 2024 4:39 pm

birdy_z4 wrote: ↑Wed Apr 24, 2024 1:03 pm

B21 wrote: ↑Tue Apr 23, 2024 8:57 pm Have you done the door handles ?

Only the internal for now

Bit more of a big ticket item…but..given your journey..do-able

Thanks had the external handles off before and did contemplate doing it now and will revisit. Got an arm op next week which will stop the tinkering for a couple of months so out of time