Page 1 of 1
"Bleeding Clutch"
Posted: Fri Dec 12, 2014 6:46 pm
by ZedM
Is it possible to bleed the clutch on a 2003 2.5i SE Z4 without removing the slave cylinder and using a special tool to press in the slave cylinder piston? I'm looking to remove the CDV but it's the "bleeding bit" afterwards that's putting me off. Any suggestions would be welcome - thanks.
Re: "Bleeding Clutch"
Posted: Fri Dec 12, 2014 6:59 pm
by GaryT
Once the cdv is bypassed then all you need is access to the bleed nipple and someone to sit in the car and manually pump the brake pedal, or buy/borrow an autobleed kit
Re: "Bleeding Clutch"
Posted: Sat Dec 13, 2014 3:43 pm
by ZedM
jyonaudl wrote:Once the cdv is bypassed then all you need is access to the bleed nipple and someone to sit in the car and manually pump the brake pedal, or buy/borrow an autobleed kit
Thanks for the confirmation. How will pumping the brake pedal help? lol
Don't worry - I know what you meant.
Re: "Bleeding Clutch"
Posted: Sat Dec 13, 2014 5:36 pm
by GaryT
ZedM wrote:jyonaudl wrote:Once the cdv is bypassed then all you need is access to the bleed nipple and someone to sit in the car and manually pump the brake pedal, or buy/borrow an autobleed kit
Thanks for the confirmation. How will pumping the brake pedal help? lol
Don't worry - I know what you meant.
