Z4-forum.com

Babw wrote: ↑Sun Apr 02, 2017 12:49 pm

D4dawg wrote: ↑Sun Apr 02, 2017 11:58 am
I've forgotten again
Shall try tomorrow once home
In diary!!

Appreciate it.

48cm from end to end buddy

D4dawg wrote: ↑Tue Apr 04, 2017 7:32 pm

Babw wrote: ↑Sun Apr 02, 2017 12:49 pm

D4dawg wrote: ↑Sun Apr 02, 2017 11:58 am
I've forgotten again
Shall try tomorrow once home
In diary!!

Appreciate it.

48cm from end to end buddy

Thank you

Welcome sorry about Time frame !!
Exact engineering if need

D4dawg wrote: ↑Thu Apr 06, 2017 2:13 pm Welcome sorry about Time frame !!
Exact engineering if need

What exactly do I ask for from Exact Engineering? Brembo banjo fitting on one side and BMW fitting on the other?

What calipers are you using buddy?

Give them a call and say did some for my z4m oem to my 6 pot brembos buddy
Think m10 straight bolt:)

D4dawg wrote: ↑Thu Apr 06, 2017 6:50 pm What calipers are you using buddy?

I'm running Brembo's front and rear. It's just the supplier sent me E46 M3 rear hoses by mistake and old brakes were off when we realised so the garage just fitted them with an alternative routing. It's been fine but best to stay with the OEM routing and 48cm does sound a lot longer than the current rear hoses.

I'll give them a call and request the same Z4M to Brembo rear hoses that you had from them.

Ah rears you wanted measured ?
That's the fronts buddy n yeah ask for same fitment as mine buddy
Rears I've got 4 pots coming and have hel hoses premade for them
Happy to measure in morning if needed

D4dawg wrote: ↑Thu Apr 06, 2017 10:58 pm Ah rears you wanted measured ?
That's the fronts buddy n yeah ask for same fitment as mine buddy
Rears I've got 4 pots coming and have hel hoses premade for them
Happy to measure in morning if needed

The front ones are fine on mine, please measure the rears for me. Happy to have the measurements posted here in about a weeks time, no pressure.

Hahahahah
Sod and right off hhahah
Dan aka bmw addict were catching up tonight and he laughed saying how crap I was at this measuring thing
My word I'll do in morning buddy haha!

58cm from.end to end buddy
No bango just straight bolt end

D4dawg wrote: ↑Fri Apr 07, 2017 8:28 am 58cm from.end to end buddy
No bango just straight bolt end

58cm it is.

Are you sure your Brembo's take a straight bolt end? I'll have a look at mine (at the moment I have three cars with Brembo's) and I'm pretty sure they're all banjo fittings.

Front and rears yes buddy
Can have banjos if so wish
No difference;)