Z4-forum.com

Does anyone have idea how to remove these pieces please.

https://www.newtis.info/tisv2/a/en/e89- ... r/8IoY5lGH
Seems like it needs to be done with the bumper off from the inside.
Are you going to paint them?

Nictrix wrote: ↑Sun Aug 20, 2017 4:33 pm https://www.newtis.info/tisv2/a/en/e89- ... r/8IoY5lGH
Seems like it needs to be done with the bumper off from the inside.
Are you going to paint them?

That's great thanks.

I think the silver surround (not the centre piece) needs blending in to the bumper, I'm either going to paint them black or get them "carbon" dipped.

They do look a bit odd and kind of cheap looking in that grey colour.

The silver bits, they just pull off from the front.
Ease the middle section out first.
My were black, I sprayed them silver.

flybobbie wrote: ↑Sun Aug 20, 2017 6:28 pm The silver bits, they just pull off from the front.
Ease the middle section out first.
My were black, I sprayed them silver.

Cheers I'll give that a go.

Trim removal tools pop these off no trouble.

flybobbie wrote: ↑Sun Aug 20, 2017 6:28 pm ... My were black, I sprayed them silver.