I realised that the front indicators have 2 bulbs in each cluster and it was the drivers side right one that was out - highlighted in white below:
![Image](http://i1301.photobucket.com/albums/ag118/MarlonZ4/307fffc4-1932-4c6a-a6ff-212398717805_zpskgyafjdg.jpg)
So I bought a new bulb and fitted it, but I’m still getting the same warnings?
To make sure it wasn’t a faulty bulb I swapped the working bulb on the left side of the indicator cluster to the right side, but it still gives the same warnings.
As a final check I put the original ‘faulty’ bulb into the left side of the indicator cluster and it worked!
I have run a diagnostic check and there are no DTC codes.
I’ve spent all bloody afternoon on this and got nowhere
![Headbang :headbang:](./images/smilies/headbanger.gif)
Any ideas would be much appreciated.
EDIT:
Prior to the warnings I had fitted LED side light bulbs. When I started getting the warnings I replaced the LEDs with the original standard bulbs. I read somewhere that LEDs can mess up the control module
![Crying or Very sad :cry:](./images/smilies/crying.gif)