Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Bored today and tried an experiment
- chanlon1
- Member
- Posts: 468
- Joined: Mon Jan 02, 2023 11:36 pm
- Location: Belfast
Bored today and tried an experiment
Replaced my rocker cover recently and had all the old head bolts left over as they are deemed single use.
Decided to see how much you could torque them before they snapped.
When installing new ones on the engine, they say to torque to 7nm, leave 30 minutes and then turn further 90 degrees.
Assuming my old ones were slightly stretched already, I know they weren’t as strong as new ones, however on more than enough of them, as soon as I got to 13nm, they snapped.
12nm and they were fine, 13nm they snapped.
Not highly exciting but killed the time in between rain showers…..
Decided to see how much you could torque them before they snapped.
When installing new ones on the engine, they say to torque to 7nm, leave 30 minutes and then turn further 90 degrees.
Assuming my old ones were slightly stretched already, I know they weren’t as strong as new ones, however on more than enough of them, as soon as I got to 13nm, they snapped.
12nm and they were fine, 13nm they snapped.
Not highly exciting but killed the time in between rain showers…..
E86 Z4 Coupe 2006 Silver
- 1536Z4
- Senior Member
- Posts: 1669
- Joined: Thu Nov 19, 2020 9:37 pm
- Location: North Shropshire
Bored today and tried an experiment
![ROFL :rofl:](./images/smilies/smilie_roflmao2.gif)
![Thumbs Up :thumbsup:](./images/smilies/smilie_thumbsup.gif)
Montego Blue E86 . MILV`s . Simpson Custom Manifold Race Exhaust . xHP transmission stage 3 . VT engine mounts . BC RA coilovers . H&R arbs . Adjustable rear camber arms . Ultra Racing front strut brace . Drexler LSD .
-
- Lifer
- Posts: 8611
- Joined: Wed Jan 20, 2021 7:20 pm
- Location: Spaldingski
Bored today and tried an experiment
All good, presuming your torque wrench has been calibrated recently.
7-13nm is not a lot, just over 'fully seated' so there is a huge margin for error on a less than high precision spanner.
Passes the time, though, I suppose.![Thumbs Up :thumbsup:](./images/smilies/smilie_thumbsup.gif)
7-13nm is not a lot, just over 'fully seated' so there is a huge margin for error on a less than high precision spanner.
Passes the time, though, I suppose.
![Thumbs Up :thumbsup:](./images/smilies/smilie_thumbsup.gif)
All good things come to those who wait. I'm really impatient which explains a lot.
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
F31 320i. Good car.
E89 20i Now fully dried
Z3 'free litre'. Project and a half. Complicated!
Mazda3 sold
Tatty old R56 Mini Cooper. Money pit!
- chanlon1
- Member
- Posts: 468
- Joined: Mon Jan 02, 2023 11:36 pm
- Location: Belfast
Bored today and tried an experiment
True - tightening to 7nm isn't much, but when you are doing this for your very first time and they say to go a further 90 degrees....paranoia kicks in very quickly that they'll snap
E86 Z4 Coupe 2006 Silver
- N4LLY
- Senior Member
- Posts: 2087
- Joined: Sat Nov 24, 2018 12:11 pm
- Location: Kent
-
- Lifer
- Posts: 11112
- Joined: Tue Feb 10, 2015 10:27 pm
Bored today and tried an experiment
M roady...OEM CSL’s, strut brace, Remus back boxes, ZHP
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
MR2 MK 2
E89 35i project car...mapped 365bhp, M4 stoppers & wheels, KWV3’s, H&R front ARB, M3 front arms, strut brace Eisenmann cat back race exhaust, VRSF downpipes inbound
E89 35is
G29
- DMike
- Senior Member
- Posts: 2459
- Joined: Tue Sep 11, 2007 7:15 pm
- enuff_zed
- Lifer
- Posts: 15040
- Joined: Wed Oct 26, 2016 11:05 am
- Location: Attleborough, Norfolk
Bored today and tried an experiment
Were these bolts magnetic?
- chanlon1
- Member
- Posts: 468
- Joined: Mon Jan 02, 2023 11:36 pm
- Location: Belfast
Bored today and tried an experiment
Nope.
Not sure what type they were, but they were very light.
E86 Z4 Coupe 2006 Silver
- enuff_zed
- Lifer
- Posts: 15040
- Joined: Wed Oct 26, 2016 11:05 am
- Location: Attleborough, Norfolk
Bored today and tried an experiment
So they would have been the alloy ones. Bears out my theory that I was ok to reuse the steel ones I had on mine
- pvr
- Legend
- Posts: 26347
- Joined: Fri Jun 15, 2007 12:27 pm
- Location: South East UK
Bored today and tried an experiment
And now getting the snapped ones out of the block
![Laughing :lol:](./images/smilies/laughing.gif)
![Poke :poke:](./images/smilies/poke.gif)
![Laughing :lol:](./images/smilies/laughing.gif)
Current:
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
- chanlon1
- Member
- Posts: 468
- Joined: Mon Jan 02, 2023 11:36 pm
- Location: Belfast
Bored today and tried an experiment
since they had been already used, I suspect they had been stretched to some extent, so its possible brand new ones last a bit longer than 13Nm.
E86 Z4 Coupe 2006 Silver