Good Evening everyone!
I searched through many forums trying to figure out how to code the RHD motor to a LHD steering rack to no avail..
Does anyone know how to do such a thing?
Thanks in advance to everyone
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Coding a RHD EPS Motor to a LHD Steering rack
-
- Newbie
- Posts: 7
- Joined: Tue Apr 09, 2024 10:14 pm
-
- Newbie
- Posts: 9
- Joined: Thu Aug 10, 2023 12:40 pm
Coding a RHD EPS Motor to a LHD Steering rack
Hi everybody I have an Audi A6 2014 LHD with PS module all out dead, I purchased for 150 euros a RHD guiding module, I introduced this RHD module yet the vehicle's directing wheel vibrates a ton when I turn start on. pls somebody assist me I with paying for this work.
192.168.100.1 192.168.1.1
192.168.100.1 192.168.1.1
Last edited by dabshu on Wed May 01, 2024 6:00 pm, edited 1 time in total.
- enuff_zed
- Lifer
- Posts: 14929
- Joined: Wed Oct 26, 2016 11:05 am
- Location: Attleborough, Norfolk
Coding a RHD EPS Motor to a LHD Steering rack
Hello, I suspect it is the same issue that the Z4 has. The motor is mounted on the opposite side of the column so has to rotate in the opposite direction. Therefore when you turn left it wants to turn right.
I have no idea if this can be coded or whether you will need to find the correct part.
I have no idea if this can be coded or whether you will need to find the correct part.