Had one of our Bristol members over on Saturday with an airbag light that wouldn't reset. Door card had been off previously when applying sound deadening so airbag had been disturbed before light appeared. Full Launch scan revealed SBSR Resistance, Firing Circuit Thorax Airbag Rear Right. Checked connector of airbag in the door which appeared ok. Suspicion then turned to the Satellite Module on that side, checked for dampness but was bone dry, connector and pins inspected all looked fine. Our resident local Breaker Umfaan was consulted and he could come up with a suitable module, airbag and door wiring loom. Having seen the same problem before he suspected the airbag plug may be the cause and arrangements made to meet up at the Shed next day with the assorted spares to have another go at solving the issue. Sunday afternoon saw three of us at the Shed. Once the door card was off a close inspection of the airbag plug by Umfaan revealed that the two black plastic spacers that cover the terminals were in fact missing. Decision was made to use the intact plug from the spare door loom he brought as the window motor plugs were different and not compatible with the car. Plug soldered into the original loom and the joints insulated with heat shrink and tape. Once connected the Launch scanner was fired up and the codes cleared, cycled the ignition and success airbag light went out. All put back together and one happy owner headed back to Bristol.
Looks to me that the two black spacers that were missing are in fact used to ensure a tight connection to the airbag socket and ensures a stable resistance to be maintained when connected by applying pressure to the metal contacts within the plug.
Have added some photos, if you zoom in onto the airbag you can see the black clip that went missing which was the cause of the airbag light, just shows how important that little clip is to maintain a constant resistance reading.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Zedshed Cymru Airbag escapade
- colb
- Senior Member
- Posts: 1765
- Joined: Wed Nov 13, 2019 9:45 pm
- Location: Newport, South Wales UK
Zedshed Cymru Airbag escapade
- Attachments
-
- IMG-20240128-WA0001.jpg (159.07 KiB) Viewed 186 times
-
- IMG_20240428_153145 (2).jpg (193.03 KiB) Viewed 186 times
Last edited by colb on Mon Apr 29, 2024 9:14 am, edited 1 time in total.
Z Shed Cymru member
1999 1.8 Z3
2003 2.5 Z4
If the forum helped you, why not help the forum back. Thats the Z4 way!
https://www.paypal.com/cgi-bin/webscr?c ... source=url
1999 1.8 Z3
2003 2.5 Z4
If the forum helped you, why not help the forum back. Thats the Z4 way!
https://www.paypal.com/cgi-bin/webscr?c ... source=url
- BumpyZ4
- Member
- Posts: 683
- Joined: Mon Feb 17, 2020 8:05 pm
- Location: New Orleans, LA USA
- bigwinn
- Lifer
- Posts: 5056
- Joined: Wed Jul 08, 2020 7:13 pm
- Location: Lincoln UK
- Contact:
Zedshed Cymru Airbag escapade
Good to know- I knew the black pins were essential but I will check this on my ongoing airbag fault car (Tony’s)
If the forum helped you, why not help the forum back. Thats the Z4 way!
EWS Delete PM me
Coding- airbags etc PM me
EWS Delete PM me
Coding- airbags etc PM me
- enuff_zed
- Lifer
- Posts: 16396
- Joined: Wed Oct 26, 2016 11:05 am
- Location: Attleborough, Norfolk
Zedshed Cymru Airbag escapade
Blimey looks like I sold him a dud!
That was the car that had no membrane at all in the right door, so I had the airbag off.
Sure I would have noticed them missing ?
I have read elsewhere that the clips somehow complete the circuit. Being plastic they must push a metal part in somewhere?
Couldn’t just fit the clips then?
That was the car that had no membrane at all in the right door, so I had the airbag off.
Sure I would have noticed them missing ?
I have read elsewhere that the clips somehow complete the circuit. Being plastic they must push a metal part in somewhere?
Couldn’t just fit the clips then?
-
- Senior Member
- Posts: 1384
- Joined: Mon Dec 18, 2017 10:36 pm
- Location: Miskin , South Wales
Zedshed Cymru Airbag escapade
A case of idle fingers …tampering…..