Z4-forum.com

Firstly, I know there is already a thread for 'who has Carly', but in many cases there is a need for the more advanced software which not everyone uses.

Over the last few months there have been an awful lot of new people joining who have issues with their cars.
The first response is always "Get the codes read", which is of course the logical first step.
The second response is often "Buy yourself a code reader". Again, a logical step.
However, not everyone wants to rush straight out and buy a code reader, especially when that means they just have to report back with the codes to gain further advice.
So, given that there are quite a few members dotted around who already have the required kit, I thought maybe it would make sense to start a little list of who can help and what area they are in. That way a 'newbie' (or indeed a long term member) can not only get their codes read without being robbed, but is most likely going to get first hand guidance at the same time of what they need to do next.

I have previously seen people use maps where you click on an area and the local people pop up. No idea if that is feasible or how to go about it though?

NORFOLK
Enuff_zed - Autophix 5900, INPA/EIDEBAS Suite, Scanner 1.4. If essential I would be happy to travel a reasonable distance in return for a bit of fuel money.

enuff_zed wrote: ↑Sat Oct 21, 2023 3:53 pm
NORFOLK
Enuff_zed - If essential I would be happy to travel a reasonable distance return for a bit of fuel money.

WEST SUSSEX

PVR, have a Carly license to read the codes.

enuff_zed wrote: ↑Sat Oct 21, 2023 3:53 pm NORFOLK
Enuff_zed - If essential I would be happy to travel a reasonable distance return for a bit of fuel money.

Great shout Martin.

SURREY HANTS BORDER
Zedebee - Creator 310+ and INPA on laptop.

NORFOLK
Enuff_zed - Autophix 5900, INPA/EIDEBAS Suite, Scanner 1.4. If essential I would be happy to travel a reasonable distance in return for a bit of fuel money.



WEST SUSSEX
PVR, have a Carly license to read the codes.


SURREY HANTS BORDER
Zedebee - Creator 310+ and INPA on laptop.




South East of London - Central Europe
RobbiZ4 - Carly & Laptop wit I++A, roof EKG

NORFOLK
Enuff_zed - Autophix 5900, INPA/EIDEBAS Suite, Scanner 1.4. If essential I would be happy to travel a reasonable distance in return for a bit of fuel money.

Jock156 - Carly



WEST SUSSEX
PVR, have a Carly license to read the codes.


SURREY HANTS BORDER
Zedebee - Creator 310+ and INPA on laptop.




South East of London - Central Europe
RobbiZ4 - Carly & Laptop wit I++A, roof EKG

It's great to see the community coming together to help each other. Having a list of members with diagnostic tools and their areas will undoubtedly be a valuable resource for those seeking assistance. Kudos for offering your expertise status and willingness to travel, Enuff_zed! This collaborative approach can make troubleshooting and getting advice a much smoother experience for everyone.

South Wales UK Enthusiasts Zed Shed Cymru located in Newport.
BMW INPA, NCS Expert, Creator 310+, Launch Tablet Scanner/Coding Tablet (All Makes not just BMW), BMW Scanner 1.4, Engine Check Pro

Scottish Borders

ISTA/ISPA/NCS via K/D CAN and ICOM..good for E85/89
Bimmergeeks Protool good for E89
Foxwell 530 good for E89

Well, it would be nice to keep/update all contacts in one single post.

Copy former post, adding updates, submit.

South Yorkshire Creator 310+

paddy wright wrote: ↑Tue Feb 06, 2024 8:50 am South Yorkshire Creator 310+

i see, you understood me.

NORFOLK
Enuff_zed - Autophix 5900, INPA/EIDEBAS Suite, Scanner 1.4. If essential I would be happy to travel a reasonable distance in return for a bit of fuel money.

NORWICH
Jock156 - Carly

WEST SUSSEX
PVR - have a Carly license to read the codes.

SURREY HANTS BORDER
Zedebee - Creator 310+ and INPA on laptop.

SOUTH EAST OF LONDON - CENTRAL EUROPE
RobbiZ4 - Carly & Laptop wit I++A, roof EKG

SOUTH WALES
colb - Enthusiasts Zed Shed Cymru located in Newport.
BMW INPA, NCS Expert, Creator 310+, Launch Tablet Scanner/Coding Tablet (All Makes not just BMW), BMW Scanner 1.4, Engine Check Pro

SCOTTISH BORDERS
B21 - ISTA/ISPA/NCS via K/D CAN and ICOM..good for E85/89, Protool good for E89, Foxwell 530 good for E89

SOUTH YORKSHIRE
paddy wright - Creator 310+

Thanks @Zedebee, I'd done it tonight.

NORFOLK
Enuff_zed - Autophix 5900, INPA/EIDEBAS Suite, Scanner 1.4. If essential I would be happy to travel a reasonable distance in return for a bit of fuel money.

NORWICH
Jock156 - Carly

WEST SUSSEX
PVR - have a Carly license to read the codes.

SURREY HANTS BORDER
Zedebee - Creator 310+ and INPA on laptop.

SOUTH EAST OF LONDON - CENTRAL EUROPE
RobbiZ4 - Carly & Laptop wit I++A, roof EKG

SOUTH WALES
colb - Enthusiasts Zed Shed Cymru located in Newport.
BMW INPA, NCS Expert, Creator 310+, Launch Tablet Scanner/Coding Tablet (All Makes not just BMW), BMW Scanner 1.4, Engine Check Pro

SCOTTISH BORDERS
B21 - ISTA/ISPA/NCS via K/D CAN and ICOM..good for E85/89, Protool good for E89, Foxwell 530 good for E89

SOUTH YORKSHIRE
paddy wright - Creator 310+

NEAR MANSFIELD (NOTTS and DERBYSHIRE)
Rockhopper (Paul Charlton) C310+ and BMW Scanner 1.4

RobbiZ4 wrote: ↑Tue Feb 06, 2024 10:39 am

paddy wright wrote: ↑Tue Feb 06, 2024 8:50 am South Yorkshire Creator 310+

i see, you understood me.

Sorry- missed that!