Z4-forum.com

Posted: **Sun Apr 21, 2024 3:22 pm**

Hello,

A couple of weeks ago the power steering module died so I stripped it out and had it all sorted at ecu tuning. After refitting the unit I now have sticky steering all the time. I have made 3 adjustments where I am now about 10-12mm from the original mark.

For those who have experienced PSM failure, did you also experience sticky steering after the unit being fixed?

TIA

Paul

Posted: **Sun Apr 21, 2024 4:13 pm**

GOM wrote: ↑Sun Apr 21, 2024 3:22 pm Hello,

A couple of weeks ago the power steering module died so I stripped it out and had it all sorted at ecu tuning. After refitting the unit I now have sticky steering all the time. I have made 3 adjustments where I am now about 10-12mm from the original mark.

For those who have experienced PSM failure, did you also experience sticky steering after the unit being fixed?

TIA

Paul

I've always been lucky Paul, lined up the datum line and all has been good.
When I adjust I usually do 8-10mm at a time, so possibly you need to go further.
If not, then return to the datum and go the other way.
Let us know how you get on.

Posted: **Sun Apr 21, 2024 5:15 pm**

Maybe I am being too reserved. Will move it another 10mm and see what happens.

Z4-forum.com

Replaced the PSM but now have sticky steering

Replaced the PSM but now have sticky steering

Replaced the PSM but now have sticky steering

Replaced the PSM but now have sticky steering