Hi all,
having just taken my passenger seat out by mistake looking for the yaw sensor I notice the up and down does not work, tilt and back/fwd fine, is there a common fault ie motor or is it just the usual electrical checks ?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
seat up/down motor
-
redgum
- Member
- Posts: 71
- Joined: Tue Jul 25, 2023 6:11 pm
- Location: Gloucester
-
enuff_zed
- Lifer
- Posts: 14938
- Joined: Wed Oct 26, 2016 11:05 am
- Location: Attleborough, Norfolk
seat up/down motor
Usel is the seat guru. Hopefully he'll see this soon.
HQ of 'Norfolk Zed Rescue'.
Always happy to help if I can.
If the forum helped you, why not help the forum back. Thats the Z4 way!
Always happy to help if I can.
If the forum helped you, why not help the forum back. Thats the Z4 way!
-
Usel
- Member
- Posts: 901
- Joined: Thu Feb 27, 2014 7:59 am
seat up/down motor
There isn't really a common fault but it's likely a wiring problem. It also be the switch or the motor.
Check the wires to the motors are firmly connected first. If no problems there then you will need to check the connections with a multimeter which will involve taking the side plastic off the seat and getting the switch unit out.
Check the wires to the motors are firmly connected first. If no problems there then you will need to check the connections with a multimeter which will involve taking the side plastic off the seat and getting the switch unit out.