I meant to drill a hole throught the plastic cubby hole, not the bulkhead, as PVR's photo shows there is plenty of room already through the Bulkhead.cj10jeeper wrote:There is no way I would drill a hole through the rear bulkhead given the work involved Vs threading through an existing hole. You'll need to drill a much larger hole, rustproof/paint it and then insert a rubber grommet to prevent chaffing.DannyBoy wrote:Thanks Phil but reckon that might be beyond my technical scope! Will stick with the drill idea as its more me.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Threading Wires through the Boot/Seat rear Bulkhead....
- srhutch
- Moderator
- Posts: 26959
- Joined: Tue Jun 19, 2007 1:22 pm
- Location: East Sussex, UK
- Contact:
Re: Threading Wires through the Boot/Seat rear Bulkhead....
- cj10jeeper
- Lifer
- Posts: 17846
- Joined: Fri Jun 22, 2007 11:50 am
- Location: Lichfield, England
Re: Threading Wires through the Boot/Seat rear Bulkhead....
OK - for sure that's an easy enough solution
Jaguar F-Type 3.0 Supercharged V6 S, Stratus Grey, LSD, Active Exhaust, CF wheels, Performance brakes, Sports seats and mods ongoing
Gone but not forgotten Z4 3.0i SE Roadster ///M front, Red ///M leather seats, Aero sills
Gone but not forgotten Z4 3.0i SE Roadster ///M front, Red ///M leather seats, Aero sills