Hello,
I've been searching and I didn't found answer:
Where do you install your Intravee ynit?
I was thinking about glovebox. Will I be able to drag a cable without any drilling? Maybe you have some other propositions?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Intravee/Dice unit installation
- rosskins
- Member
- Posts: 179
- Joined: Sun Nov 30, 2014 9:14 pm
- Location: Rossendale
Intravee/Dice unit installation
Hi, you will find everything you need to know here http://www.m3forum.net/m3forum/showthread.php?t=462308
Current: F-Type AWD V6 & M135i
Before: ZR3.0si, 525d, 325ti, 120d, A3-2.0DSG, 323T4x4, MX3-V6, 2CV, MetroVP, Mini850
Zed was fitted with: None run flats, Stubby, Cruise, Intravee, DrilledFogs, WiredCam & 326s
Before: ZR3.0si, 525d, 325ti, 120d, A3-2.0DSG, 323T4x4, MX3-V6, 2CV, MetroVP, Mini850
Zed was fitted with: None run flats, Stubby, Cruise, Intravee, DrilledFogs, WiredCam & 326s
-
- Member
- Posts: 53
- Joined: Tue Apr 05, 2016 8:31 pm
Intravee/Dice unit installation
Hmm, but it's for other car Isn't things like placing that unit specific for model? Each car have different interior
-
Onlinenick_l
- Senior Member
- Posts: 1034
- Joined: Sun Nov 07, 2010 8:03 pm
- Location: Essex
Intravee/Dice unit installation
My dice media bridge is tucked in the void behind the roof controls/ash tray. There is a hole from a previous owners stereo that runs into the glove box where I have Usb and aux cables.
I was thinking about modifying the panel that's under the heater controls, with a usb and aux socket.
I was thinking about modifying the panel that's under the heater controls, with a usb and aux socket.