guys,
can someone with an OEM wind deflector take some measurements for me? I'd like to know the height, width top and width at the bottom.
I'm going to try and make one from perspex to fit.
Thanks
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
dimensions of the oem wind deflector
- Dr-Jon
- Member
- Posts: 207
- Joined: Thu Apr 13, 2017 8:51 am
- Location: Southampton
-
- Senior Member
- Posts: 2811
- Joined: Sun Nov 20, 2016 2:49 am
dimensions of the oem wind deflector
Height: 18.5cm
Width top: 54.5cm
Width bottom: 43cm
It curves slightly in height from side to side. In the centre, it is 5mm higher at the bottom and 10mm at the top.
Width top: 54.5cm
Width bottom: 43cm
It curves slightly in height from side to side. In the centre, it is 5mm higher at the bottom and 10mm at the top.
Last edited by Busterboo on Mon Jun 12, 2017 1:03 pm, edited 1 time in total.
Vidi, vici, veni
- Dr-Jon
- Member
- Posts: 207
- Joined: Thu Apr 13, 2017 8:51 am
- Location: Southampton
dimensions of the oem wind deflector
are you sure about the height 8.5cm does not seem tall enough
-
- Senior Member
- Posts: 2811
- Joined: Sun Nov 20, 2016 2:49 am
dimensions of the oem wind deflector
18.5
Vidi, vici, veni
-
- Senior Member
- Posts: 2811
- Joined: Sun Nov 20, 2016 2:49 am
dimensions of the oem wind deflector
The end edges curve slightly, too, but only by 2mm. The curve is not central, though. So, if a good fit's needed, some fettling will be, too.
Vidi, vici, veni
- Dr-Jon
- Member
- Posts: 207
- Joined: Thu Apr 13, 2017 8:51 am
- Location: Southampton
dimensions of the oem wind deflector
something like this
-
- Senior Member
- Posts: 2811
- Joined: Sun Nov 20, 2016 2:49 am
dimensions of the oem wind deflector
- Dr-Jon
- Member
- Posts: 207
- Joined: Thu Apr 13, 2017 8:51 am
- Location: Southampton